140G-G6C4-D10
The 140G-G6C4-D10 model is part of the Allen-Bradley 140G series of molded case circuit breakers, featuring a fixed thermal and fixed magnetic protection mechanism. It provides a current range rated a
Call
4.9
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley 140G MCB
The Allen Bradley 140G molded case circuit breakers are suitable for a wide range of applications in low-voltage 3-phase power systems. 140G series circuit breakers can be reverse-fed. They provide overcurrent protection to conductors and other equipment, and they can be used as the main disconnecting devices for control panels. The 140G circuit breakers can also be used for branch circuit protection or as feeder breakers.
Learn more
Browse 140G MCB
Browse available units in our catalog of 140G MCB.
140G-H0C4-C60
As part of the 140G MCB series, the 140G-H0C4-C60 is engineered with fixed thermal and fixed magnetic protections. It encompasses four poles and has a current handling capability of 60 A. This circuit
Call
4.9
140G-H0H4-C60
This model features four poles and operates within a current range of up to 60 amps. The protection type is electronic LSI, providing enhanced operational safety. It can handle a rated insulation volt
Call
4.6
140G-H0H4-D10
This circuit breaker features a 4-pole configuration and is equipped with electronic LSI protection. Rated for a current range of 100 A, it operates with an insulation voltage capacity of 1000 V and i
Call
4.6
140G-H0I3-C60
This molded case circuit breaker has a current range of 60 A and is equipped with electronic LSIG protection. It can handle a rated insulation voltage of 1000 V, while the rated impulse withstand volt
Call
4.9
140G-H0I3-D16
This circuit breaker operates with a rated current range up to 160 A and provides an insulation voltage rating of 1000 volts. It withstands impulse voltages of up to 8 kV. Weighing in at 2.65 lb, it o
Call
4.7
140G-H15F3-D10
This molded case circuit breaker supports a current range up to 100 Amps. It operates effectively within insulation voltage ratings of 1000 V. The unit has a substantial impulse withstand voltage of 8
Call
4.6
140G-H6F4-D16
This circuit breaker is defined by 4 poles and accommodates a maximum current range of 160 A. It possesses adjustable protection for both thermal and magnetic trips. Rated for an insulation voltage of
Call
5.0
140G-H6H3-C25
This unit has a current range of 25 A and utilizes electronic LSI protection. It is rated for insulation up to 1000 V and can withstand impulse voltages of 8 kV. Weighing 2.65 pounds, the device has a
Call
4.9
140G-JTF3-D25
This molded case circuit breaker features a JC frame type. The 140G-JTF3-D25 operates within a current range of 250 Amps. It supports a rated insulation voltage of 1000 V and is capable of withstandin
Call
4.6
Showing 311-320 of
1,219
results
About 140G MCB
The Allen-Bradley/Rockwell Automation 140G MCB series is a series of molded case circuit breakers. According to the National Electrical Manufacturers Association (NEMA), a circuit breaker is a device designed to open and close a circuit by non-automatic means, and to open the circuit automatically at a predetermined overcurrent level without injury to itself when it is properly applied within its rating. The 140G MCB circuit breakers employ different methods to control the operating mechanisms. These methods include stored energy operation, dependent manual/power operation, and independent manual/power operation. When breakers in the 140G MCB family encounter an overcurrent, they can use instantaneous, inverse time delay, and definite time delay overcurrent releases. All these breakers from the Allen-Bradley 140G series of molded-case circuit breakers come with a frame rating of 125 Amps and an interrupting capacity that goes from 25 to 65 kA.
The Allen-Bradley 140G MCB series of circuit breakers are CCC, UL, and CSA certified since they comply with international standards such as the UL, CSA, and IEC standards. Since these circuit breakers have molded cases, they provide short circuit and thermal overcurrent protection by using either mechanical or electronic means. Note that the mechanical means use heater elements to detect the current flow and model the associated heat generated by the current. Additionally, molded case circuit breakers in this family feature either fixed or adjustable trip units. Whether they use fixed or adjustable magnetic and thermal trip units, the motor current rating of these circuit breakers should be less than or equal to 250% of the motor’s full-load ampere rating, or less than or equal to 300% for motors with a current of less than or equal to 100 amperes if the circuit trips on startup. Also, a circuit breaker in the 140G MCB series can be used with a motor current rating of less than 400% for motors with a current rating of more than or equal to 100 Amps if the circuit breaker trips on startup. The safety features of these breakers are capable of preventing accidents such as fires and explosions due to over-current or the overheating of conduits.