1734-APB
The Allen Bradley 1734-APB is a POINT I/O PROFIBUS DP Network Adapter. It has 24 Volts DC Input Voltage and a Field Side Power of 400 milliamps with an Inrush Current of 6 amps. This PROFIBUS DP Netwo
The Allen-Bradley Point I/O 1734 modular system is designed to be different from the standard PLC controller configuration, signal acquisition, and actuator control assignment options. It is made to be an in-cabinet modular I/O platform whose modules can be stacked 1 to another and have 1 to 8 channels configured as analog or digital inputs or outputs. The system also has Ethernet, ControlNet, DeviceNet, or PROFIBUS adapters, RTD and thermocouple units, inputs for receiving signals from 5 Volts or 24 Volts rated encoders, I/O link masters, and RS-232 and RS-485 interface modules. The Point I/O 1734 system can exchange data with the PLCs whether they are installed in the same cabinet or whether they are serving as distributed I/O consoles that are positioned in extremely inaccessible and remote parts of the plant. This flexibility is further enhanced by the fact that safe and standard I/O modules can be installed in the same rack.
The Allen-Bradley Point I/O 1734 modular system in the Allen-Bradley/Rockwell Automation Integrated Architecture allows the users to diagnose each channel individually within any installed module when there is short-circuiting or disconnected wire, and it even supports alarm configuring by the users and filtering options. The system is software supported by the Studio 5000 application software and they have local autonomous control. The modules installed in the Point I/O 1734 system can be removed and inserted under power (RIUP), which is one of the most useful features for automated systems where it is vital to replace defective components. With 2 Ethernet ports, this modular I/O system can be configured as a part of a linear, star, and ring EtherNet/IP network topologies while processing up to 504 channels locally.
Browse available units in our catalog of Point I/O 1734.
The Allen Bradley 1734-APB is a POINT I/O PROFIBUS DP Network Adapter. It has 24 Volts DC Input Voltage and a Field Side Power of 400 milliamps with an Inrush Current of 6 amps. This PROFIBUS DP Netwo
The Allen Bradley 1734-IJ is a POINT I/O Incremental Encoder Module. It has 1 Counter and a Input Frequency of 1 megahertz, 500 or 250 kilohertz with a Voltage Rating of 5 Volts DC. This Incremental E
The 1734-TB3 terminal base supports a field power bus supply voltage of 28.8V DC and 120/240V AC, handling a maximum supply current of 10 A. Each signal terminal can manage a voltage of up to 28.8V DC
The Allen Bradley 1734-OB2EP is a POINT I/O Digital DC Sourcing Output Modules. It has 2 Outputs and an Output Voltage of 24 Volts DC with a POINTBus Current of 75 milliamps. This Digital DC Sourcing
This input module is rated for a maximum point bus current of 50 mA at 5 V DC. It is built to endure conditions with shock and vibration ratings of 30 g and 5 g, respectively. The 1734-IB4D module ens
Featuring a power supply requirement of 28.8 VDC, this Point I/O module supports an open type enclosure. Current specifications include a minimum off-state current of 1.5 mA and a maximum off-state vo
The 1734-OW2 module supports a maximum contact current rating of 2.0 A per channel and provides an off-state leakage current of 1.2 A at 240 VAC. It can handle a switching frequency of 0.3 Hz at a rat
The Allen Bradley 1734-ADNX is a POINT I/O DeviceNet Adapter Module. It has 24 Volts DC Input Voltage and a Field Side Power of 400 milliamps with an Inrush Current of 6 amps. This DeviceNet Adapter M
This module facilitates two output channels, each capable of handling an on-state current ranging from 10 mA to a maximum of 750 mA. Additionally, it demonstrates a surge current tolerance of 16 Amps
The Allen Bradley 1734-OB2 is a POINT I/O Digital DC Sourcing Output Modules. It has 2 Outputs and an Output Voltage of 24 Volts DC with a POINTBus Current of 75 milliamps. This Digital DC Sourcing Ou