The industrial modules that are found in the GE Fanuc Genius I-O series are designed to work with IBM PCs. These modules are known as IBM PC interface modules or PCIMs for short. The Genius I-O modules can be controlled by the IBM PCs or by PLCs or programmable logic controllers. The modules in this series come with the basic PCIM motherboard and daughterboard, a serial bus, I/O blocks, and a handheld monitor. The I/O blocks in the Genius I-O modules are used for diagnostics and troubleshooting. They can detect errors and problems that ordinary PLCs cannot such as short circuits, open circuits, and overloads.
The daughterboard in the GE Fanuc Genius I-O modules is similar to a Series Six PLC Bus controller, and it usually handles general-purpose I/O control applications and controls all the devices on the Genius Serial Bus. This daughterboard can communicate with the other devices on the Genius Serial Bus through background messaging and it can perform initialization and fault management tasks for up to 30 of these devices at a time. The motherboard in the GE Fanuc Genius I-O modules acts as an interface between a host system that is IBM-compatible and a daughterboard with Open Architecture. The PCIM motherboard is a 2-layer board while the PCIM daughterboard is a 4-layer board. All of the data that is shared between the Genius I-O PCIM and the host system passes through the host-shared RAM which is known as the SRI or the shared RAM interface.
Browse available units in our catalog of Genius I-O.
The GE Fanuc IC660EBD024 electronics assembly is an electronics assembly manufactured by GE Intelligent Platforms/GE Fanuc Automation as part of the Genius I/O series. The electronics assembly feature
The product features 32 terminal positions and is rated for a block current draw of 87 mA at 115 VAC. It can accommodate field wiring ranging from 22 to 12 AWG copper wires. Configuration settings are
This terminal assembly supports various configurations for input filter time, RTD resistance settings, and alarm thresholds. It is designed to detect faults, open wires, and shorts, ensuring reliable
The GE Fanuc IC660BRD025 Genius Modular Redundancy Sinking Output Block is made for the Genius I/O modular redundancy output subsystem. This output block has 32 output points, built-in blocking diodes
The IC660TBD110 terminal assembly belongs to the Genius I/O series. The assembly includes a block with 16 circuits and it is intended only for inputs. The assembly features an operating voltage range
This I/O terminal assembly is capable of handling both AC and DC output components, with voltage ranges up to 250 VAC and 220 VDC, respectively. The rated voltage operates at 115/230 VAC, accommodatin
This isolated I/O block features a total of 8 circuits and operates at a minimum frequency of 50 Hz and a maximum frequency of 60 Hz. The isolation between blocks is rated at 1500 V, ensuring robust p
This terminator resistor kit contains four encapsulated resistors rated at 75 Ohms. It integrates seamlessly with the Genius Bus system. The kit also comprises four connection leads, marked as SER 1,
This relay output block operates within alternating current (AC) voltage ranges of 5 to 250 volts and direct current (DC) voltage from 5 to 220 volts. It supports normally-closed relay outputs, fittin
The GE Fanuc IC660ELB905 network adapter interface board is manufactured by GE Intelligent Platforms/GE Fanuc. It belongs to the Genius I/O block series, it supports handheld monitors, and it has a ba