The industrial modules that are found in the GE Fanuc Genius I-O series are designed to work with IBM PCs. These modules are known as IBM PC interface modules or PCIMs for short. The Genius I-O modules can be controlled by the IBM PCs or by PLCs or programmable logic controllers. The modules in this series come with the basic PCIM motherboard and daughterboard, a serial bus, I/O blocks, and a handheld monitor. The I/O blocks in the Genius I-O modules are used for diagnostics and troubleshooting. They can detect errors and problems that ordinary PLCs cannot such as short circuits, open circuits, and overloads.
The daughterboard in the GE Fanuc Genius I-O modules is similar to a Series Six PLC Bus controller, and it usually handles general-purpose I/O control applications and controls all the devices on the Genius Serial Bus. This daughterboard can communicate with the other devices on the Genius Serial Bus through background messaging and it can perform initialization and fault management tasks for up to 30 of these devices at a time. The motherboard in the GE Fanuc Genius I-O modules acts as an interface between a host system that is IBM-compatible and a daughterboard with Open Architecture. The PCIM motherboard is a 2-layer board while the PCIM daughterboard is a 4-layer board. All of the data that is shared between the Genius I-O PCIM and the host system passes through the host-shared RAM which is known as the SRI or the shared RAM interface.
Browse available units in our catalog of Genius I-O.
The GE Fanuc Automation IC660EBA025 electronic assembly includes all the electronic components that enable the correct functioning of the whole output block. Its power supply voltage range is 18 to 56
The IC660TBD025 terminal assembly is a Genius I/O terminal assembly manufactured by GE Fanuc. The terminal assembly has a maximum output current of 0.5 Amps per circuit and a maximum inrush current of
The IC660TBD022 terminal assembly is a Genius I/O component that is manufactured by GE Fanuc. This terminal assembly has 16 discrete inputs and outputs and it operates on 24 Volts DC. The terminal as
The GE Fanuc IC660CBB903 Series 6 PLC Bus Controller is made for the Series 6 PLC system. This module can be installed in any CPU slots, in a regular/high-capacity I/O rack, or in a remote I/O rack, a
The GE Fanuc Automation IC660EBA100 electronics assembly supports an I/O block. It comes equipped with 4 inputs and 2 output circuits and it operates with a voltage of 93 to 132 Volts AC.
This prefabricated cable features mating connectors and operates using the Genius Serial Bus communication protocol. Its terminating plug is rated at 150 Ohms. Designed to function effectively within
This box-style terminal assembly supports operating temperatures from 0 °C to 60 °C and has a storage temperature range of -40 °C to 100 °C. Relative humidity can vary from 5% to 95%, non-condensing.
This terminal assembly operates with an input impedance of 1.7 mS and is suitable for environments with temperatures ranging from 0 to 60 degrees Celsius. It can be stored at temperatures from -40 to
The GE Fanuc IC660EBS100 electronics assembly block is manufactured by GE Fanuc Automation as a member of the Genius I/O block product line. This block comes with 8 circuits and runs on 115 Volts AC o
This terminal assembly operates within a voltage range of 18 to 56 VDC and features a gate time frequency of 400 ms. It can tolerate power dropouts for up to 10 ms and has an open-wire detection respo