M7284C1000
This actuator motor features a dual-ended shaft design and operates with an electronic control system that utilizes current inputs. It has a fixed stroke type with a power rating of 23 W and a current
Honeywell's Modutrol IV series includes motors and motor accessories. Many Modutrol IV motors can control valves and dampers, and these motors are available in spring-return and non-spring-return models. The Modutrol IV series also includes reversing and proportional motors, as well as actuators. The Modutrol IV motors that control valves and dampers use current and voltage signals to position the valves and dampers at points between closed and open. Some Modutrol IV motors support manual potentiometers. Several Modutrol IV motors have auxiliary switch cams and dual shafts that are slotted and tapped on both ends.
Browse available units in our catalog of Modutrol IV.
This actuator motor features a dual-ended shaft design and operates with an electronic control system that utilizes current inputs. It has a fixed stroke type with a power rating of 23 W and a current
This proportional actuator motor features an electronic control mechanism that uses a current input for operation. It is designed for fixed strokes of either 90° or 160°. The device operates within fr
This actuator is designed to provide reliable performance in varied conditions. It operates with an adjustable stroke angle ranging from 90° to 160° and features floating control signals. It functions
This actuator motor provides precise control in HVAC damper and valve systems with a torque rating of 75 lb-in. Designed to function within a frequency range of 50 to 60 Hz, it features a proportional
This actuator operates within a frequency range of 50 to 60 Hz. It features an adjustable stroke angle spanning from 90° to 160° and a nominal response time of 30 to 60 seconds. In fail-safe situation
This actuator motor features an integral spring return for fail-safe operation and has a torque rating of 60 lb-in. It operates with a two-position, SPST control signal. The device supports stroke ang
Operating with a supply voltage of 24 VAC, the M9185D1004 yields a torque of 60 in-lb and stroke angles of either 90 or 160 degrees. This model features a nominal timing of 30 to 60 seconds and is equ
This actuator features a stroke angle range of 90° to 160°. It delivers a torque rating of 150 lb-in, with a breakaway torque of 300 lb-in for initial movement. The actuator can operate with input sig
The actuator motor possesses a high torque capacity of 60 lb-in and includes a spring return feature. It works efficiently across a frequency range from 50 Hz to 60 Hz while drawing a rated current of
This actuator motor features adjustable stroke settings and a non-spring return action. The unit includes two SPDT snap switches and has a stroke angle of 90 degrees. It operates with a nominal timing