M9174C1025
This actuator motor provides precise control in HVAC damper and valve systems with a torque rating of 75 lb-in. Designed to function within a frequency range of 50 to 60 Hz, it features a proportional
Call
5.0
Free UPS Ground on All Orders!
+1 (919) 205-4392
Honeywell Modutrol IV
Honeywell's Modutrol IV series includes motors and motor accessories. Many Modutrol IV motors can control valves and dampers, and these motors are available in spring-return and non-spring-return models. The Modutrol IV series also includes reversing and proportional motors, as well as actuators. The Modutrol IV motors that control valves and dampers use current and voltage signals to position the valves and dampers at points between closed and open. Some Modutrol IV motors support manual potentiometers. Several Modutrol IV motors have auxiliary switch cams and dual shafts that are slotted and tapped on both ends.
Learn more
Browse Modutrol IV
Browse available units in our catalog of Modutrol IV.
M9182A1011
This actuator motor is engineered for electric and commercial HVAC settings. It functions with a 24 VAC supply and supports a torque rating of 60 lb-in. The M9182A1011 operates with a stroke angle ran
Call
5.0
M9184A1019
This device operates within a voltage supply of 24 VAC and is designed to work efficiently within frequency ranges of 50 to 60 Hz. Its control signal impedance is rated at 135 Ohms. The unit is charac
Call
5.0
M9184C1031
This actuator motor features adjustable stroke settings and a non-spring return action. The unit includes two SPDT snap switches and has a stroke angle of 90 degrees. It operates with a nominal timing
Call
5.0
M9184D1021
This actuator operates effectively within a frequency range of 50 to 60 Hz and utilizes a 135-ohm proportional control signal. Its adjustable stroke angle ranges from 90° to 160°, and it features a no
Call
5.0
M9184F1034
This device functions with a control signal resistance of 135 ohms and features two auxiliary switches. The actuator motor has a stroke angle configurable between 90 and 160 degrees, with a nominal ti
Call
5.0
M9185A1018
This actuator operates within a frequency range of 50 to 60 Hz. It features an adjustable stroke angle spanning from 90° to 160° and a nominal response time of 30 to 60 seconds. In fail-safe situation
Call
5.0
M9185D1004
Operating with a supply voltage of 24 VAC, the M9185D1004 yields a torque of 60 in-lb and stroke angles of either 90 or 160 degrees. This model features a nominal timing of 30 to 60 seconds and is equ
Call
5.0
M9185D4008
This actuator motor operates with a frequency range from 50 to 60 Hz and features an integral spring return fail-safe mode. Its timing ranges from 30 to 60 seconds for nominal operation, and it allows
Call
5.0
M9191F1001
This actuator motor weighs 6.5 lbs and has a VA rating of 15 VA, allowing it to handle various load conditions. It has an adjustable stroke type and a single-ended shaft configuration without spring r
Call
5.0
Showing 31-40 of
49
results