M9484E1033
Designed to endure demanding environments, this motor operates efficiently with a minimum temperature of -40°C and can handle maximum ambient temperatures up to 66°C, assuming a 25% duty cycle. Users
Honeywell's Modutrol IV series includes motors and motor accessories. Many Modutrol IV motors can control valves and dampers, and these motors are available in spring-return and non-spring-return models. The Modutrol IV series also includes reversing and proportional motors, as well as actuators. The Modutrol IV motors that control valves and dampers use current and voltage signals to position the valves and dampers at points between closed and open. Some Modutrol IV motors support manual potentiometers. Several Modutrol IV motors have auxiliary switch cams and dual shafts that are slotted and tapped on both ends.
Browse available units in our catalog of Modutrol IV.
Designed to endure demanding environments, this motor operates efficiently with a minimum temperature of -40°C and can handle maximum ambient temperatures up to 66°C, assuming a 25% duty cycle. Users
This modulating motor offers adjustable stroke angles between 90 degrees and 160 degrees. It operates within a frequency range of 50 Hz to 60 Hz. The motor features a fail-safe non-spring return mode
This proportional control actuator can operate with a stroke adjustment range of 90° to 160° and supports a control signal input via Series 90 Proportional. With an enclosure rated to NEMA 3, it is co
Designed to operate on a supply voltage of 24 VAC, the actuator functions effectively within a frequency range of 50 Hz to 60 Hz. It features a stroke angle adjustable from 90° to 160°, enabling versa
This actuator motor operates within a frequency range of 50 to 60 Hz and delivers a torque rating of 150 lb-in. It features a stroke angle adjustable between 90 and 160 degrees, with nominal timing ra
This floating control actuator motor operates with a control signal that provides a normal running torque of 60 lb-in and a breakaway torque of 120 lb-in. It features a stroke angle between 90° and 16
This actuator motor features a stroke angle of 90 degrees and operates with a control signal resistance of 135 ohms. It includes one auxiliary switch and has a nominal timing of 30 seconds. Designed t
This device functions with a control signal resistance of 135 ohms and features two auxiliary switches. The actuator motor has a stroke angle configurable between 90 and 160 degrees, with a nominal ti
This electric control motor is designed with a dual-ended shaft for versatility and can support a maximum deadweight of 200 lbs at either end, with a total load capacity of up to 300 lbs. It operates
This actuator features a control signal resistance of 135 ohms and a maximum torque rating of 75 lb-in, with an impressive breakaway torque of 150 lb-in. This model supports stroke timings of either 1