- Dead displays
- Local/remote port failures
- Main control board failures
- I/O Failures
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley IMC S Class Repair
We offer extensive repairs for your IMC S Class. We keep many spare parts in stock so that we can repair your IMC S Class as efficiently and effectively as possible. Our standard repair lead time is 2-4 weeks. However, we can often repair your unit much faster if necessary. We can repair most issues with your IMC S Class and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your IMC S Class parts.
- Power control board failures
- SCR/IGBT failures
- Faulty fans
- Heatsink sensor faults
- DC bus failures
- Precharge failures
- Undervoltage
- Overvoltage
- Broken Plastic Covers
- Missing Covers
- Missing Terminals
- Broken mounting attachments/corners
Browse IMC S Class Repairs
Browse our catalog of repairable IMC S Class parts to get a quote.
4100-AEC
This module operates effectively at temperatures ranging from 0 °C to 40 °C and maintains performance with humidity levels up to 80% non-condensing. The 4100-AEC has an IP20 rating, indicating protect
Available
4100-CCA15F
The 4100-CCA15F model is an interface cable featuring flying leads and is compatible with motion control applications. It operates within a temperature range of 0 to 40 degrees Celsius and can be stor
In Stock Ships Today
4100-CCAQB
This encoder/resolver cable assembly accommodates a single axis connection and utilizes the 4100 pre-engineered cable series. The assembly includes two connectors: a high-density connector for the IMC
Available
4100-CCF1
This 1-foot cable assembly is preterminated at both ends, featuring a mini-D connector. It is necessary to have one cable assembly for each IMC S Class device. It operates efficiently at elevations up
In Stock Ships Today
4100-CCW15F
This cable assembly is equipped with a multi-pin IDC header on the CPU end and a multi-pin header/terminal block connector on the watchdog end. It includes 28 AWG conductors with a PVC jacket. Insulat
In Stock Ships Today
4100-EF08
This encoder buffer unit supports a maximum input current draw of 1.1 Amps at 18 VDC, dropping to 0.8 Amps at 24 VDC, and 0.7 Amps at 36 VDC. With eight follower outputs, it transmits data at RS422 TT
In Stock Ships Today
4100-REC
This unit operates at frequencies between 50 Hz and 60 Hz and is constructed from painted steel. With an IP20 protection rating, it is suitable for indoor environments. The operating temperature range
Available
Showing 31-37 of
37
results
About IMC S Class
The IMC S Class is an entire series of microprocessor-controlled digitally programmable servo motor controllers manufactured by Allen-Bradley. The motion controllers are available in 2 axes (0 and 1) and 4 axes (0, 1, 2, and 3) encoder input and servo output configurations. Each controller features an Intel 80960SB 16 Mega-Hertz motion control microprocessor and they support synchronous, concurrent, and independent motion on all axes. These controllers can be used to achieve standalone motion and logic control in a wide spectrum of industrial applications. Communication with other devices can be established through the dedicated serial communication ports on the controllers.
Integrating the IMC S motion controllers into a servo system with separate drives and feedback encoders allow the system to achieve closed-loop point-to-point positioning. Motion controllers in this series are available in input voltage ratings of 90 to 100 Volts and 175 to 264 Volts AC. Each unit has 26,000 electronic cam profile points that can coordinate motion with other axes. The non-volatile storage option on the controllers is a battery-backed, write-protected RAM and the integral remote input/output function can be used to directly connect the controllers to Allen-Bradley programmable logic controllers. The operating system of the IMC S class servo motion controllers supports multitasking. They can perform 10 tasks simultaneously and the acceleration and deceleration rates are independently programmable. They support up to 2,000 user-defined variables. The velocity profile options include parabolic, S-curve, and trapezoidal velocity. The Graphical Motion Control Language (GML) from Allen-Bradley is used for programming and customizing the IMC S class servo motion controllers.