- Dead displays
- Local/remote port failures
- Main control board failures
- I/O Failures
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley Kinetix 5700 Repair
We offer extensive repairs for your Kinetix 5700. We keep many spare parts in stock so that we can repair your Kinetix 5700 as efficiently and effectively as possible. Our standard repair lead time is 2-4 weeks. However, we can often repair your unit much faster if necessary. We can repair most issues with your Kinetix 5700 and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your Kinetix 5700 parts.
- Power control board failures
- SCR/IGBT failures
- Faulty fans
- Heatsink sensor faults
- DC bus failures
- Precharge failures
- Undervoltage
- Overvoltage
- Broken Plastic Covers
- Missing Covers
- Missing Terminals
- Broken mounting attachments/corners
Browse Kinetix 5700 Repairs
Browse our catalog of repairable Kinetix 5700 parts to get a quote.
2198-D020-ERS4
This Allen-Bradley Kinetix 5700 EtherNet/IP Servo Drive is a Dual-axis Inverter which has a Bandwidth Velocity loop, max and Current loop of 400 Hz, 1000 Hz and an AC input frequency of 4 kHz. This dr
In Stock Ships Tomorrow
2198-D032-ERS3
The Allen-Bradley 2198-D032-ERS3 Kinetix 5700 is a strong drive exhibiting 8.9 kWatts Continuous Output Power and a 4.4-5.3 lb\*in (0.5-0.6 N\*m) Torque Value. Running feedback through a single cable
In Stock Ships Today
2198-D032-ERS4
This Allen-Bradley Kinetix 5700 EtherNet/IP Servo Drive is a Dual-axis Inverter which has a Bandwidth Velocity loop, max and Current loop of 400 Hz, 1000 Hz and an AC input frequency of 4 kHz. This dr
In Stock Ships Today
2198-D057-ERS3
The Allen-Bradley 2198-D057-ERS3 Kinetix 5700 is a strong drive exhibiting 15.9 kWatts Continuous Output Power and a 4.4-7.1 lb\*in (0.5-0.8 N\*m) Torque Value. Running feedback through a single cable
In Stock Ships Today
2198-D057-ERS4
This Allen-Bradley Kinetix 5700 EtherNet/IP Servo Drive is a Dual-axis Inverter which has a Bandwidth Velocity loop, max and Current loop of 400 Hz, 1000 Hz and an AC input frequency of 4 kHz. This dr
In Stock Ships Tomorrow
2198-K57CK-D15M
This universal feedback connector kit is tailored for use with Kinetix 5700 drives. It accommodates 2090 motor feedback cables and supports a cable diameter ranging from 6.5 mm to 11.9 mm. The kit inc
Call
2198-KITCON-D032-L
The 2198-KITCON-D032-L is a connector kit specifically designed for Allen Bradley’s Kinetix 5700 series of servo drives. It includes a variety of connectors essential for interfacing with dual-axis in
Call
2198-P031
This power supply module accepts AC input voltages of 195 to 528 volts (rms) across a 3-phase setup and supports frequencies from 47 to 63 Hz. The unit maintains a nominal bus voltage output between 2
In Stock Ships Today
2198-P070
The Allen-Bradley 2198-P070 Kinetix 5700 is a strong drive exhibiting 17 kWatts Continuous Output Power and a 4.4-7.1 lb\*in (0.5-0.8 N\*m) Torque Value. Running feedback through a single cable and de
In Stock Ships Today
2198-P141
The Allen-Bradley 2198-P141 Kinetix 5700 is a strong drive exhibiting 31 kWatts Continuous Output Power and a 22-40 lb\*in (2.5-4.5 N\*m) Torque Value. Running feedback through a single cable and desi
In Stock Ships Today
Showing 11-20 of
38
results
About Kinetix 5700
The Kinetix 5700 series is a drive module series which are zero stacked and use the share bus connection system. This drive series has been designed and developed by Allen-Bradley. It supports the integrated motion over the Ethernet/IP network. These drives have 3-phase input power which is supplied by a single DC bus power supply. The capacitor modules can be used to extend the DC bus. The series supports different internet topologies, including linear ring and star topologies that use Allen-Bradley ControlLogix, GuardLogix, and the CompactLogix controllers. The Kinetix 5700 series drives have a safe torque-off feature. The drives are available in different module width variations of 55, 85, and 100 millimeters. The internal capacitance level is also different in different drive variants. The 5700 series drives help to reduce the commissioning time and improve the overall machine performance. The drives feature dual-axis modules and support large 1.6 to 112 Kilowatts power ranges.
The Kinetix 5700 drives come with load observer real-time tuning technology. They help to save time by mitigating the need for tuning each axis and they enhance machine performance. The drive series also features regenerative bus supplies. The drives are equipped with status indicators and LCD status displays. The indicators and displays are used to monitor the system status, set network parameters, and troubleshoot faults. The Kinetix 5700 series is equipped with two RJ 45 connectors and cable connectors and it features zero stacking mounting cutouts on the top of the drives. The 5700 drives are equipped with motor overload retention, torque proving, velocity droop, adaptive tuning, and extended speed features. The drives meet the CE, EMC, and the low voltage directives. The 5700 drives can also be selected based on different dimensions and weights.