- Bad communication ports
- Broken selector/key switches
- Dead batteries/Bad Battery connections
- Solid or Blinking RED OK Status Light
- Solid or Blinking RED RUN Status Light
- Solid or Blinking RED Fault Status Light
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors Repair
We offer extensive repairs for your IEC 100 Contactors. We keep many spare parts in stock so that we can repair your IEC 100 Contactors as efficiently and effectively as possible. Our standard repair lead time is 3-5 days. However, we can often repair your unit much faster if necessary. We can repair most issues and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your IEC 100 Contactors parts.
- Bad analog inputs or ouptus
- Bad digital input or outputs
- Bad relays (stuck on/off)
- Incorrect voltages on inputs or outputs
- Incorrect current on inputs or outputs
- DF1, DH-485, DH+, Profibus, Remote I/ (RIO) failures and more!
- Intermittent communication
- Solid RED/Blinkging RED communication lights
- Devicenet, Ethernet, ControlNet, RS232 ports.
- Missing CJC Jumpers
- Incorrect readings
- Failed inputs
- Dead power supplies
- Incorrect voltage
- Broken Plastic
- Poor Connections
- Bad Slots
Browse IEC 100 Contactors Repairs
Browse our catalog of repairable IEC 100 Contactors parts to get a quote.
100-E116KD11L
The 100-E116KD11L contactor is an IEC 100 contactor manufactured by Allen-Bradley. It has an operating current rating of 116 Amps. It comes with a standard electronic coil with an optional PLC interfa
Call
100-E116KJ11
The 100-E116KJ11 is a contactor made by Allen-Bradley/Rockwell Automation as part of the 100-E and IEC 100 Contactors series. The IEC contactor is a direct-on-line contactor with rated currents of 116
In Stock Ships Today
100-E116KJ11L
The IEC 100 series contactor variant with the product code 100-E116KJ11L is made by Allen-Bradley/Rockwell Automation and it is a direct-on-line contactor. The 100-E116KJ11L contactor has a rated curr
Call
100-E116KN11
The 100-E116KN11 IEC 100 contactor is a direct-on line contactor manufactured by Allen-Bradley. It complies with the IEC standards. It has an operational current rating of 116 Amps and it is suited fo
Call
100-E116KN11L
The 100-E116KN11L contactor is a large-frame IEC 100 contactor manufactured by Allen-Bradley. It has a rated operational current of 116 Amps. It features 3 NO main contacts, 1 NO auxiliary contact, an
In Stock Ships Today
100-E116KY11
The Allen-Bradley 100-E116KY11 contactor is an IEC 100 and 100-E series large contactor. It has 3 poles. The main terminals on the 100-E116KY11 contactor use bar connections.
Call
100-E116KY11L
The Allen-Bradley 100-E116KY11L contactor is an IEC 100 series 116 Amps-rated contactor. It has built-in lugs for the main contactor terminals. The 100-E116KY11L contactor is a 3-pole contactor.
Call
100-E1260ED11
Designed with three normally open contacts and no normally closed contacts, this contactor supports a rated operation current of 1260 A at 400 V. The device utilizes AC or DC voltage for actuation. It
Call
100-E1260EJ11
The 100-E1260EJ11 contactor is a 3-pole contactor designed by Allen-Bradley/Rockwell Automation in the 100-E product series. This direct-on-line contactor has 1 N.O. and 1 N.C. auxiliary contact and a
Call
100-E1260EY11
The Allen-Bradley/Rockwell Automation contactor with the product code 100-E1260EY11 is a direct-on-line contactor with 3 poles. The unit has a rated isolation voltage of 690 Volts (AC-1) and an operat
Call
Showing 501-510 of
720
results