- Bad communication ports
- Broken selector/key switches
- Dead batteries/Bad Battery connections
- Solid or Blinking RED OK Status Light
- Solid or Blinking RED RUN Status Light
- Solid or Blinking RED Fault Status Light
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors Repair
We offer extensive repairs for your IEC 100 Contactors. We keep many spare parts in stock so that we can repair your IEC 100 Contactors as efficiently and effectively as possible. Our standard repair lead time is 3-5 days. However, we can often repair your unit much faster if necessary. We can repair most issues and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your IEC 100 Contactors parts.
- Bad analog inputs or ouptus
- Bad digital input or outputs
- Bad relays (stuck on/off)
- Incorrect voltages on inputs or outputs
- Incorrect current on inputs or outputs
- DF1, DH-485, DH+, Profibus, Remote I/ (RIO) failures and more!
- Intermittent communication
- Solid RED/Blinkging RED communication lights
- Devicenet, Ethernet, ControlNet, RS232 ports.
- Missing CJC Jumpers
- Incorrect readings
- Failed inputs
- Dead power supplies
- Incorrect voltage
- Broken Plastic
- Poor Connections
- Bad Slots
Browse IEC 100 Contactors Repairs
Browse our catalog of repairable IEC 100 Contactors parts to get a quote.
100-E09KJ200
The 100-E09KJ200 contactor is a large frame IEC 100 series contractor from Allen-Bradley. It has an operating current rating of 9 Amps. It has a control voltage range of 24 to 60 Volts AC/20 to 60 DC
Call
100-E09KJ400
This contactor features four normally open (N.O.) contacts, accommodating multiple motor control needs while having no normally closed (N.C.) contacts. It boasts a rated operational voltage and insula
Call
100-E09KN01
This contactor features one normally closed auxiliary contact and can operate effectively at an installation altitude of up to 3000 m. It is rated for a maximum switching frequency of 600 operations p
Call
100-E09KN10
The 100-E09KN10 contactor is an IEC 100 series standard MCS-E contactor. It is one of the Bulletin 100-E power contactors from Allen-Bradley. This model is available with an A3 duty rating and it come
Available
100-E09KN200
The 100-E09KN200 contactor is an IEC 100 contactor from the Allen-Bradley Bulletin 100-E line of products. It is AC3 rated and has a current rating of 9 Amps. It comes with 4 poles that include 2 N.O.
Call
100-E09KN400
The 100-E09KN400 contactor is an Allen-Bradley MCS-E Contactor manufactured in accordance with the IEC standards. It is a standard contactor with 4 normally open main contacts. It has a rated current
Call
100-E09KY01
This contactor comprises three poles and utilizes an electronic coil for operation. It can accommodate control voltages ranging from 48 to 130 Volts AC or DC. The contactor supports a maximum installa
Call
100-E09KY10
The 100-E09KY10 contactor is an IEC 100 series contactor. Its current rating is 9 Amps. The coil control voltage rating is 48 to 130 Volts AC/DC.
Call
100-E09KY200
The Allen-Bradley 100-E09KY200 contactor is an IEC 100 series contactor. It is also a 4-pole contactor. Auxiliary contacts are not available on the 100-E09KY200 contactor.
Call
100-E09KY400
The Allen-Bradley 100-E09KY400 contactor is a large contactor. It is a 4-pole contactor. The 100-E09KY400 has 4 normally-open contacts.
Call
Showing 481-490 of
720
results