- Bad communication ports
- Broken selector/key switches
- Dead batteries/Bad Battery connections
- Solid or Blinking RED OK Status Light
- Solid or Blinking RED RUN Status Light
- Solid or Blinking RED Fault Status Light
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors Repair
We offer extensive repairs for your IEC 100 Contactors. We keep many spare parts in stock so that we can repair your IEC 100 Contactors as efficiently and effectively as possible. Our standard repair lead time is 3-5 days. However, we can often repair your unit much faster if necessary. We can repair most issues and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your IEC 100 Contactors parts.
- Bad analog inputs or ouptus
- Bad digital input or outputs
- Bad relays (stuck on/off)
- Incorrect voltages on inputs or outputs
- Incorrect current on inputs or outputs
- DF1, DH-485, DH+, Profibus, Remote I/ (RIO) failures and more!
- Intermittent communication
- Solid RED/Blinkging RED communication lights
- Devicenet, Ethernet, ControlNet, RS232 ports.
- Missing CJC Jumpers
- Incorrect readings
- Failed inputs
- Dead power supplies
- Incorrect voltage
- Broken Plastic
- Poor Connections
- Bad Slots
Browse IEC 100 Contactors Repairs
Browse our catalog of repairable IEC 100 Contactors parts to get a quote.
100-DTB180
This terminal block is designed to support currents of up to 210 A and utilizes a screw terminal configuration for connectivity. It operates effectively within a temperature range of 0 °C to 40 °C and
In Stock Ships Today
100-E09EJ01
The Allen-Bradley 100-E09EJ01 Contactor is a DIN Rail-mounted, coil-controlled contactor from the Allen-Bradley IEC 100 Contactors series. The 100-E09EJ01 Contactor has a rated switching current of 9
Available
100-E09EJ10
The Allen-Bradley 100-E09EJ10 Contactor is a contactor from the Allen-Bradley Bulletin 100E family and the IEC 100 Contactors series. The 100-E09EJ10 has a rated switching current of 9 Amps. It has 3
In Stock Ships Today
100-E09EJ200
The Allen-Bradley 100-E09EJ200 Contactor is a DIN Rail-mounted, coil controlled contactor. It is part of the IEC 100 Contactors series The 100-E09EJ200 Contactors has a rated switching current of 9 Am
Call
100-E09EJ400
The Allen-Bradley 100-E09EJ400 Contactor is a DIN Rail-mounted and coil controlled contactor. The 100-E09EJ400 Contactor has a rated switching current of 9 Amps and 4 poles. It has an IP2X protection
Call
100-E09EQ01
The Allen-Bradley 100-E12EQ01 Contactor is part of the IEC 100 Contactors series. The 100-E12EQ01 Contactor has a rated switching current of 12 Amps. It comes with 3 poles and Class F insulation.
Call
100-E09EQ10
This contactor has a rated isolation voltage of 690 V and can withstand an impulse voltage of up to 6 kV. It is designed for a switching frequency of 600 operations per hour under AC-1 conditions. The
Call
100-E09EQ200
The 100-E09EQ200 direct-on-line contactor by Allen-Bradley/Rockwell Automation features 4 poles and it can operate on both AC and DC power sources. The unit has a rated isolation voltage of 600/690 Vo
Call
100-E09EQ400
The 4-pole contactor component with the product code 100-E09EQ400 is a DC and AC operated contactor for direct-on-line applications. The contactor is available through the IEC 100-E/104-E product seri
Call
100-E09KD01
The product code 100-E09KD01 represents a contactor unit introduced by Allen-Bradley/Rockwell Automation. The 100-E09KD01 contactor is part of IEC 100-E/104-E series and it comes with 1 normally close
Call
Showing 521-530 of
783
results