- Bad communication ports
- Broken selector/key switches
- Dead batteries/Bad Battery connections
- Solid or Blinking RED OK Status Light
- Solid or Blinking RED RUN Status Light
- Solid or Blinking RED Fault Status Light
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley PLC 5 Repair
We offer extensive repairs for your PLC 5. We keep many spare parts in stock so that we can repair your PLC 5 as efficiently and effectively as possible. Our standard repair lead time is 2-4 weeks. However, we can often repair your unit much faster if necessary. We can repair most issues with your PLC 5 and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your PLC 5 parts.
- Bad analog inputs or ouptus
- Bad digital input or outputs
- Bad relays (stuck on/off)
- Incorrect voltages on inputs or outputs
- Incorrect current on inputs or outputs
- DF1, DH-485, DH+, Profibus, Remote I/ (RIO) failures and more!
- Intermittent communication
- Solid RED/Blinkging RED communication lights
- Devicenet, Ethernet, ControlNet, RS232 ports.
- Missing CJC Jumpers
- Incorrect readings
- Failed inputs
- Dead power supplies
- Incorrect voltage
- Broken Plastic
- Poor Connections
- Bad Slots
Browse PLC 5 Repairs
Browse our catalog of repairable PLC 5 parts to get a quote.
1772-MS8
This memory segment card is compatible with PLC-2 processors and Mini PLC-2 series core memory modules. The device's installation is facilitated by keying features that include two keys on one end and
In Stock Ships Today
1772-P1
This power supply module supports input voltage levels of 98 to 132 volts AC or 196 to 264 volts AC with an input frequency ranging from 47 Hz to 63 Hz. It delivers a consistent output voltage of 5 VD
In Stock Ships Today
1772-P2
Intended for PLC 2/20 controllers, this auxiliary power supply operates within a voltage range of 95 to 250 volts AC with an output of 6.5 amperes. Its operational frequency sits between 50 to 60 Hert
Available
1772-SD
This Remote I/O Scanner supports a maximum communication distance of 10,000 feet to the remote adapter, ensuring flexibility in system design. It utilizes twinaxial cable for reliable communication an
In Stock Ships Today
1772-SD-A
This remote I/O scanner operates with a maximum distance of 3048 meters to connect with remote distribution panels. Designed with a twinaxial cable, it utilizes serial communication protocols to trans
Call
1772-SD2
Designed for integration with PLC-2 series controllers, the 1772-SD2 offers a maximum supply current of 2 A. It allows for 16 adapters maximum per channel, ensuring robust connectivity. This panel sup
In Stock Ships Today
1772-T4
This controller supports voltages of 120 to 220 VAC and functions well as an adapter within a more extensive automation setup. It can endure humidity levels of up to 80% without condensation and opera
Call
1772-TC
This gray interconnect cable acts as a spare part or accessory for PLC 5 setups, offering optimal flexibility. It operates effectively in temperatures ranging from 32°F to 104°F and can be stored betw
In Stock Ships Today
1777-IA
This input module is rated for operation in a temperature range from 0 to 60 degrees Celsius. It can also function in humidity levels between 5 to 95%, without condensation. Its storage capabilities e
In Stock Ships Today
1784-CP
This communication cable assembly features HD62 male connectors on the PLC side and DB9 male D-Sub connectors on the PC side, ensuring reliable interfacing with supported 1784-KT, KT2, KTP, and KL car
In Stock Ships Today
Showing 381-390 of
532
results
About PLC 5
The PLC 5 controllers series is a series of programmable controllers which are used at the center of a machine architecture system which brings together existing and future networks by using different types of networks, including Ethernet/IP, ControlNet, and DeviceNet networks. They offer connectivity between the SLC 500, ControlLogix, and MicroLogix controllers. These controllers can help to control the architecture and offer cost-effective connections to a wide range of devices. They feature input/output modules inside a single chassis with a power supply. The PLC 5 controllers come with onboard remote I/O scanner ports and onboard extended I/O scanner ports. These controllers are available in a wide range of input/output capacities and memory sizes. They can also be connected to a wide variety of networks for distributed processing and distributed input/output.
The PLC 5 controllers come with several programming features that help to serve different application demands. They come with ladder logic which programs a language and is representative of the relay logic. The subroutines in the controllers help to store the recurring sections of the program logic which can be accessed from multiple program files. They also feature sequential functional charts and structured texts. The PLC 5 controllers come with a maximum of 16 module I/O slots. Also, the controllers can be mounted by using a back panel or by using a rack. A wide variety of data formats are available in the PLC series. No external power is required for the controllers. The PLC 5 controllers are also available based on the number of user memory words, memory size, processor types. The PLC 5 controllers are also available with different input resolutions, input types, and output resolutions. Various operating voltages can be used to run the controllers. Multiple LED indicators are housed in the PLC 5 controllers to show different information.
Common error/issues withe PLC 5 include:
Plastics, power supply, enclosure and mounting
Mounting clips
Dismounting clips
Racking guides
Grounding clip
Dead backplane
Stripped threads
Damaged rack
no power through AUX power
Damaged power board
Power pins
Node address switches
Communications
RS-232
DH+ ports
Ethernet port
Side mounted port
No connection
Loss of communications
No communications
Faulty key switch
Lights
BATT light
Solid PROG lights
LED indicators
I/O
Discrete output replacement relay or TRIAC
Discrete input replacement
Analog out
Analog in
RTD channel repair
Fused input/output replacement