- Bad communication ports
- Broken selector/key switches
- Dead batteries/Bad Battery connections
- Solid or Blinking RED OK Status Light
- Solid or Blinking RED RUN Status Light
- Solid or Blinking RED Fault Status Light
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley Point I/O 1734 Repair
We offer extensive repairs for your Point I/O 1734. We keep many spare parts in stock so that we can repair your Point I/O 1734 as efficiently and effectively as possible. Our standard repair lead time is 2-4 weeks. However, we can often repair your unit much faster if necessary. We can repair most issues with your Point I/O 1734 and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your Point I/O 1734 parts.
- Bad analog inputs or ouptus
- Bad digital input or outputs
- Bad relays (stuck on/off)
- Incorrect voltages on inputs or outputs
- Incorrect current on inputs or outputs
- DF1, DH-485, DH+, Profibus, Remote I/ (RIO) failures and more!
- Intermittent communication
- Solid RED/Blinkging RED communication lights
- Devicenet, Ethernet, ControlNet, RS232 ports.
- Missing CJC Jumpers
- Incorrect readings
- Failed inputs
- Dead power supplies
- Incorrect voltage
- Broken Plastic
- Poor Connections
- Bad Slots
Browse Point I/O 1734 Repairs
Browse our catalog of repairable Point I/O 1734 parts to get a quote.
1734-FPDK
This distributor module is designed for Point I/O systems and acts as a field potential distributor. With nominal input voltages of 120/240V AC and 12/24V DC, it supports a DC voltage range from 10 to
In Stock Ships Today
1734-IA2
This module features a single group configuration containing two input channels that accept a nominal voltage of 120 Volt AC. The isolation rating ensures continuous safe operation from the field to t
In Stock Ships Today
1734-IA4
The Allen-Bradley 1734-IA4 is a POINT I/O Digital AC Input Module. It has 2 or 1 group of 4 Inputs and an Input Voltage of 120 Volts AC with an POINTBus Current of 75 milliamps. This Digital AC Input
In Stock Ships Today
1734-IB2
This module achieves a maximum input current of 4 mA at 24 V DC and can handle a POINTBus current of up to 75 mA at 5 V DC. It offers 50 V continuous isolation and has been tested for 2500 V DC, ensur
In Stock Ships Today
1734-IB4
This input module operates with sinking inputs and supports four separate inputs in one group. It functions effectively at a nominal on-state voltage of 24V DC and can handle a maximum on-state voltag
In Stock Ships Today
1734-IB4D
This input module is rated for a maximum point bus current of 50 mA at 5 V DC. It is built to endure conditions with shock and vibration ratings of 30 g and 5 g, respectively. The 1734-IB4D module ens
In Stock Ships Today
1734-IB8
This input module supports eight sinking inputs with a nominal current rating of 4 milliamps at 24 volts DC. The input voltage can be off up to a maximum of 5 volts DC, while the minimum off-state cur
In Stock Ships Today
1734-IB8K
This input module features eight separate inputs, all with individual status indicators. It supports both 2-wire and 3-wire proximity switches, enabling adaptability in various applications. Operating
In Stock Ships Today
1734-IB8S
This safety module includes eight inputs, each with a minimum on-state voltage requirement of 11 volts DC and a minimum operating current of 3.3 milliamps. Additionally, it boasts a maximum off-state
In Stock Ships Today
1734-IB8SK
The 1734-IB8SK input module from Allen-Bradley/Rockwell Automation is a Point I/O 1734 series digital safety input module. It comes with 8 inputs that support safety devices like emergency stop button
In Stock Ships Today
Showing 21-30 of
121
results
About Point I/O 1734
The Allen-Bradley 1734 Point I/O modules are available as digital, analog, specialty, AC/DC, RTD, Thermocouple, and point guard safety-rated input/output modules for a range of applications. Each module has 1 to 8-point channel density and they support producer/consumer technology for sharing input information and output status between multiple Logix controllers. Four of the main components of the Point I/O 1734 modules are communication interface modules, terminal base units, power distribution modules, and field interface and system-interface circuitry. The network protocols available for modules in the Point I/O 1734 product family include the EtherNet/IP, ControlNet, DeviceNet, Profibus, and other open network protocols. They allow up to 504 channels on a single network interface. The modular design and removable terminations offer the flexibility and cost-effectiveness of using only the modules that the users’ specific applications require. They also allow for the side-by-side operation of standard I/O and safe I/O in the same chassis, and they support local and remote operation.
Point I/O 1734 modules are a major component of Allen-Bradley Automation Integrated Architecture systems and they offer channel-level diagnostics for fast and seamless troubleshooting. Modules in this family are equipped with user-configurable features, including channel-level alarm announcements and channel-level short-circuit detection with electronic feedback to meet application-specific requirements. Point I/O 1734 modules have remove and insert under power (RIUP) support to allow for maintenance while the system is running and the modules and base units can be mounted horizontally or vertically without impeding performance. The full add-on profiles for programming Point I/O 1734 modules are available in the Studio 5000 and RSLogix 5000 computer software.