- Bad communication ports
- Broken selector/key switches
- Dead batteries/Bad Battery connections
- Solid or Blinking RED OK Status Light
- Solid or Blinking RED RUN Status Light
- Solid or Blinking RED Fault Status Light
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley Point I/O 1734 Repair
We offer extensive repairs for your Point I/O 1734. We keep many spare parts in stock so that we can repair your Point I/O 1734 as efficiently and effectively as possible. Our standard repair lead time is 2-4 weeks. However, we can often repair your unit much faster if necessary. We can repair most issues with your Point I/O 1734 and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your Point I/O 1734 parts.
- Bad analog inputs or ouptus
- Bad digital input or outputs
- Bad relays (stuck on/off)
- Incorrect voltages on inputs or outputs
- Incorrect current on inputs or outputs
- DF1, DH-485, DH+, Profibus, Remote I/ (RIO) failures and more!
- Intermittent communication
- Solid RED/Blinkging RED communication lights
- Devicenet, Ethernet, ControlNet, RS232 ports.
- Missing CJC Jumpers
- Incorrect readings
- Failed inputs
- Dead power supplies
- Incorrect voltage
- Broken Plastic
- Poor Connections
- Bad Slots
Browse Point I/O 1734 Repairs
Browse our catalog of repairable Point I/O 1734 parts to get a quote.
1734-IJ
The Allen-Bradley 1734-IJ is a POINT I/O Incremental Encoder Module. It has 1 Counter and a Input Frequency of 1 megahertz, 500 or 250 kilohertz with a Voltage Rating of 5 Volts DC. This Incremental E
In Stock Ships Tomorrow
1734-IK
The Allen-Bradley 1734-IK is a POINT I/O Incremental Encoder Module. It has 1 Counter and an Input Voltage of 15-24 volts DC with an Input Current of 6.1 milliamps at 15 Volts DC. This Incremental Enc
In Stock Ships Today
1734-IM2
With non-isolated sinking inputs, this input module features a nominal input impedance of 22.3 kΩ. It can handle a maximum PointBus current of 75 mA at 5 V DC and offers power dissipation of 0.48 W at
In Stock Ships Today
1734-IM4
This AC input module accommodates both minimum and maximum on-state voltages of 159V AC and 264V AC, respectively. It also features a minimum on-state current of 6.2 mA, while the maximum off-state cu
In Stock Ships Today
1734-IR2
This module supports non-isolated, single-ended inputs and includes status indicators for operational monitoring. Its absolute accuracy rating is 0.1% full scale at 25 degrees Celsius. The 1734-IR2 ut
In Stock Ships Today
1734-IR2E
The Allen-Bradley 1734-IR2E is a POINT I/O Analog Temperature Input Module. It has 2 high resolution RTD Inputs and a Data Format of Signed Integer with an Input Resolution of 16 bits. This Analog Tem
In Stock Ships Today
1734-IR2K
This module provides an input range from 0 to 600 Ohms and maintains an impressive absolute accuracy of 0.1% at 25 degrees Celsius. Rarely affected by temperature changes, its accuracy drift is rated
In Stock Ships Today
1734-IT2I
This temperature input module accommodates two channels for thermocouple signals. It employs a delta-sigma conversion method and provides high-resolution data at 15 bits. The module operates using POI
In Stock Ships Today
1734-IT2IK
The 1734-IT2IK thermocouple input module accommodates two inputs, each providing individual electrical isolation. Capable of handling thermocouple types B, C, E, J, K, N, R, S, and T, it incorporates
In Stock Ships Today
1734-IV2
The module supports an on-state rated voltage between 10 VDC and 28.8 VDC, ensuring versatility in various applications. It can manage a minimum on-state current of 2 mA, up to a maximum of 5 mA. Addi
Call
Showing 41-50 of
121
results
About Point I/O 1734
The Allen-Bradley 1734 Point I/O modules are available as digital, analog, specialty, AC/DC, RTD, Thermocouple, and point guard safety-rated input/output modules for a range of applications. Each module has 1 to 8-point channel density and they support producer/consumer technology for sharing input information and output status between multiple Logix controllers. Four of the main components of the Point I/O 1734 modules are communication interface modules, terminal base units, power distribution modules, and field interface and system-interface circuitry. The network protocols available for modules in the Point I/O 1734 product family include the EtherNet/IP, ControlNet, DeviceNet, Profibus, and other open network protocols. They allow up to 504 channels on a single network interface. The modular design and removable terminations offer the flexibility and cost-effectiveness of using only the modules that the users’ specific applications require. They also allow for the side-by-side operation of standard I/O and safe I/O in the same chassis, and they support local and remote operation.
Point I/O 1734 modules are a major component of Allen-Bradley Automation Integrated Architecture systems and they offer channel-level diagnostics for fast and seamless troubleshooting. Modules in this family are equipped with user-configurable features, including channel-level alarm announcements and channel-level short-circuit detection with electronic feedback to meet application-specific requirements. Point I/O 1734 modules have remove and insert under power (RIUP) support to allow for maintenance while the system is running and the modules and base units can be mounted horizontally or vertically without impeding performance. The full add-on profiles for programming Point I/O 1734 modules are available in the Studio 5000 and RSLogix 5000 computer software.