- Bad communication ports
- Broken selector/key switches
- Dead batteries/Bad Battery connections
- Solid or Blinking RED OK Status Light
- Solid or Blinking RED RUN Status Light
- Solid or Blinking RED Fault Status Light
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley PowerMonitor 3000 Repair
We offer extensive repairs for your PowerMonitor 3000. We keep many spare parts in stock so that we can repair your PowerMonitor 3000 as efficiently and effectively as possible. Our standard repair lead time is 3-5 days. However, we can often repair your unit much faster if necessary. We can repair most issues and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your PowerMonitor 3000 parts.
- Bad analog inputs or ouptus
- Bad digital input or outputs
- Bad relays (stuck on/off)
- Incorrect voltages on inputs or outputs
- Incorrect current on inputs or outputs
- DF1, DH-485, DH+, Profibus, Remote I/ (RIO) failures and more!
- Intermittent communication
- Solid RED/Blinkging RED communication lights
- Devicenet, Ethernet, ControlNet, RS232 ports.
- Missing CJC Jumpers
- Incorrect readings
- Failed inputs
- Dead power supplies
- Incorrect voltage
- Broken Plastic
- Poor Connections
- Bad Slots
Browse PowerMonitor 3000 Repairs
Browse our catalog of repairable PowerMonitor 3000 parts to get a quote.
1400-BCU
This communication card operates with baud rates for remote I/O at 57.6, 115.2, and 230.4 k Baud, while serial connections can be made at rates ranging from 300 to 19200 Baud. It is suitable for mount
In Stock Ships Today
1400-DCU
This communication interface card connects via a terminal-based connector and utilizes the PanelMonitor backplane for host interfacing. It supports RS-232C and RS-485 communication modes while enablin
Available
1400-PB51A
Designed to accommodate a rated current of 5.0 A, the 1400-PB51A block module can function effectively between 0 °C and 40 °C. It is capable of operating in humidity levels up to 80% without condensat
Call
1400PD51A
This modular power monitoring device operates on a power supply ranging from 85 to 264 VAC or 110 to 300 VDC. It features four current measurement channels and four voltage sensing channels. The displ
Call
1400PD51B
This device supports a 3-phase input configuration and is equipped to monitor various parameters through four current and four voltage inputs. It features up to 277V AC status inputs and provides thre
Call
1400PD52A
This display module provides essential monitoring capabilities and supports inputs including four channels for current (5 Amps Full Scale) and four channels for voltage (120V Line-Neutral and 208V Lin
Call
1400SP
This supplementary protector has multiple pole configurations including 1, 2, 3, 1+N, and 3+N types, providing flexibility for various wiring needs. The unit is rated for an interrupting capacity of 1
Call
1404-DM
This HMI display module supports a maximum cable length of 3 meters and has a front seal rating of IP65 to protect against environmental factors. It operates at input power levels ranging from 102 to
In Stock Ships Today
1404-M405A-000
This module is capable of measuring both 3-phase and single-phase systems, with voltage measurements spanning from 0 to 600 volts AC. The accuracy of this device is classified as Revenue Grade with a
Available
1404-M405A-CNT
With the capability to monitor in 3-phase systems, this device operates effectively at frequencies ranging from 45 to 65 Hz. The Powermonitor is designed for DIN-rail mounting, featuring an IP20 enclo
Call
Showing 1-10 of
32
results