Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley Panelview 300 Repair

Allen Bradley Panelview 300 Repair

We offer extensive repairs for your Panelview 300 and Panelview 300 Micro. We keep many spare parts in stock so that we can repair your Panelview 300 as efficiently and effectively as possible. Our standard repair lead time is 3-5 days. However, we can often repair your unit much faster if necessary. We can repair most issues with your Panelview 300 and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!

  • 2 Year DO Supply Warranty
  • Fast repairs at low costs
  • No surprises or up-charges for difficult repairs
  • Standard lead time of 2-4 weeks
  • Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with DO Supply's 2-year warranty.
Learn more

Hardware issues & error codes we repair

We repair all of the following hardware issues and error codes with your Panelview 300 parts.

  • Stuck key/keypad (Fatal 3A or Error 31)
  • Cracked touchscreens
  • Dead Spots
  • Calibration issues

Browse Panelview 300 Repairs

Browse our catalog of repairable Panelview 300 parts to get a quote.

2711-CBL-HM10

This operating cable is part of the Panelview 300 series, designed to function with an RS-232 communication protocol. It measures 10 m and includes an 8-pin mini DIN connector. The cable supports temp

Call

2711-K3A17L1X

This PanelView interface model operates at an input voltage of 18 to 32 VDC and is equipped with 170 KB of runtime memory and a non-volatile memory capacity of 240 KB. Designed for enhanced usability,

In Stock Ships Today

2711-K3A2L1X

This Panelview 300 series operator interface features keypad input capabilities and supports a DH-485 communication option. Operating at 24V DC, it performs reliably within an environmental temperatur

In Stock Ships Today
Showing 1-10 of 10 results

About Panelview 300

The compactly manufactured PanelView 300 and Panelview 300 Micro terminals from Allen-Bradley feature a 3-inch monochrome display. The display shows status updates and information in blue. The resolution of the monochrome display is 128 x 64 pixels. The terminals work with 24 Volts DC voltage. The display area of all the terminals in this series is 2.87 inches in width and 1.67 inches in height. The backlight used in these terminals has a life of 100,000 hours. For entering input data, a keypad with navigational, numerical, and functional keys is included. The PanelView 300 terminals record critical timestamp data by using replaceable batteries. The batteries power the real-time clock used in these terminals. Some of the terminals in this series support ATA memory cards and some don’t.

For connectivity, the PanelView 300 terminals use the RS-232 (DH-485), RS-232 (DF1), and DeviceNet networks. The network status is shown on the display terminal. The terminal can be controlled using the PanelView 32 software too. The software runs on a personal computer. The DC power consumption varies in different PanelView 300 terminals. Some terminals in the series have a DC power consumption rating of 10 Watts and some have a power consumption of 25 Watts. The operating temperature of these terminal ranges between 0 and 55 degrees Celsius. The PanelView 300 terminals come with different enhanced features including alarms, screen security, analog gauges, and support for Micrologix controllers. The terminals have multilingual support with English, French, Italian, German, and Spanish Text options. The terminals in this series use 240 KB of application memory. It also comes with NEMA Type 12, 13, 4X ratings. These terminals are ideal for customers who need cost-effective devices that save space.

Common Errors Codes that we may be able to repair for the Panelview 300 and Panelview 300 Micro (2711-K3 and 2711-M3):

  • Error 1 STATIC RAM test
  • Error 2 Terminal searching for a file to download.
  • Error 10 Erase boot flash area.
  • Error 11 Copy boot code
  • Error 12 Boot code copy successful
  • Error 13 Boot code copy failed. Check for error after boot code is copied to the onboard flash EPROM.
  • Error 30 Watchdog test
  • Error 31 Stuck key test
  • Error 32 Real time clock test
  • Error 33 LCD RAM failed
  • Error 50 Wrong memory card format