- Stuck key/keypad (Fatal 3A or Error 31)
- Cracked touchscreens
- Dead Spots
- Calibration issues
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley Panelview 600 Repair
We offer extensive repairs for your Panelview 600. We keep many spare parts in stock so that we can repair your Panelview 600 as efficiently and effectively as possible. Our standard repair lead time is 3-5 days. However, we can often repair your unit much faster if necessary. We can repair most issues with your Panelview 600 and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your Panelview 600 parts.
- Blank Displays
- Dead pixels
- Burn in
- Lines through the screen
- Failing CRT
- Dim/faded screens
- Cracked Plastic
- Broken Mounting Posts/Clips
- Internal Broken Components
- Self-test errors
- Real Time Clock Errors
- Failing Batteries
- Communication Failures (RS-232, DH+, DH-485, Ethernet, Devicenet, ControlNet and more).
- Halogen Lamps
- Led Backlights
- Dead units
- Solid LED Status lights
- Blinking LED Status Lights
Browse Panelview 600 Repairs
Browse our catalog of repairable Panelview 600 parts to get a quote.
2711-K6C20L1
EtherNet/IP Communication and RS-232 Printer Port Keypad 6 in. Color Display 24V DC
In Stock Ships Today
2711-K6C20L1X
In Stock Ships Today
2711-K6C20X
This operator interface is capable of functioning at elevations up to 2000 meters. The display area measures 115 mm in width and 86 mm in height. The unit supports an operating temperature range of 0
In Stock Ships Today
2711-K6C2L1
DH-485 Communication Ports Keypad 6 in. Color Display 24V DC
Available
2711-K6C2L1X
This operator terminal supports 240 KB of nonvolatile memory and has 170 KB allocated for application runtime. The device is powered by an input voltage range of 18 to 32 volts DC. It is equipped with
Available
2711-K6C2X
This operator terminal has a display area measuring 115 x 86 mm and includes a keypad assembly with 10 function keys (F1 to F10). Its application memory consists of 190 KB for runtime and 240 KB for n
Available
2711-K6C3
DH-485 Communication and RS-232 Printer Port
In Stock Ships Today
2711-K6C3L1
DH-485 Communication and RS-232 Printer Port Keypad 6 in. Color Display 24V DC
Available
2711-K6C3L1X
This model supports an input voltage range of 18-32 VDC with a nominal supply of 24 VDC. The user interface includes a keypad with 10 function keys (F1 through F10) and integrates 240K bytes of memory
Available
2711-K6C3X
This operator interface is equipped with a 5.7-inch display capable of 320 x 234 resolution and utilizes color for enhanced visual clarity. The device is powered by an AC input range of 100 to 240 vol
Available
Showing 71-80 of
121
results
About Panelview 600
Designed by Allen-Bradley, the PanelView 600 series is a series of PanelView operator terminals that are used for controlling and monitoring the performance of the connected applications. The PanelView 600 terminals connect to the PLC controllers by using remote I/O cables. The units come with the PanelBuilder installation disk that contains the startup applications for each of the PanelView terminals. The PanelBuilder application runs on the Microsoft Windows environment operating system. The PanelView terminals support USB ports that are used for commanding the units. The PanelView terminals support reading and writing data to the SLC 500 controllers on the DH-485 network.
The PanelView 600 terminals display the application status, rated speed, and alarm banners. The alarm banner is a feature that pops up over the motor status whenever an alarm has been triggered. For the touch screen terminals, the application includes the CONFIG Screen button for allowing the users to display the terminal configuration mode menu when the application is running. The application status screen appears first on the PanelView terminals for allowing the users to stop or start the application and setting other parameters. The alarm banner displays the message that is associated with the triggered alarm. The PanelView 600 terminals are sensitive to the electrostatic discharge that can cause internal damage. Therefore, ensure that electrostatic discharge guidelines are observed during the installation, repair, and servicing of the devices. The PanelView 600 terminals should be mounted on well-grounded mounting surfaces like metal panels. Avoid letting the PanelView 600 terminals come into contact with direct sunlight and other harmful weather conditions that would involve exposure to water.
Common Errors Codes that we repair for the Panelview 600 (2711-K6, 2711-B6, and 2711-T6):
- Error 1 STATIC RAM test
- Error 2 Terminal searching for a file to download.
- Error 10 Erase boot flash area.
- Error 11 Copy boot code
- Error 12 Boot code copy successful
- Error 13 Boot code copy failed. Check for error after boot code is copied to the onboard flash EPROM.
- Error 30 Watchdog test
- Error 31 Stuck key test
- Error 32 Real time clock test
- Error 33 LCD RAM failed
- Error 50 Wrong memory card format
- Error 60 CPU could not execute code