7333 results
Functioning within EtherNet/IP protocols, this adapter supports data communication at speeds of 10 and 100 Mbps in both full- and half-duplex modes. It is designed to operate within temperatures from -10°C to 50°C and can be stored at temperatures between -40°C and 85°C, with relative humidity condi
The Allen Bradley 154-A11NB Starting Torque Controller (STC) is designed for low-Horsepower 3-phase and single-phase squirrel-cage induction motors. This STC by Allen Bradley is CE labeled, CSA Approved, and UL Listed.
This disconnect switch operates effectively at input frequencies ranging from 50 to 60 Hertz. The unit is classified as a fusible switch and can accommodate up to 10,000 mechanical operations. It supports a horsepower rating of up to 20 at 575 volts AC. Additionally, it can connect to power terminal
The 100-D180 is an Allen Bradley 100 contactor. The rated current for the 100-D180 contactor is 180 Amps. The coil needs to be ordered separately for the 100-D180 contactor.
The 1408-EM3A-ENT module is a demand, energy, and power monitor module from the PowerMonitor 1000 family. An integrated Ethernet port is provided on the 1408-EM3A-ENT module for network communication. The control input to the device can be either 120 to 240 Volts AC or 125 to 250 Volts DC.
This device operates at a maximum voltage of 600 Volts AC and DC, making it suitable for various applications. The electrical connection is achieved through a screw-type mechanism, accommodating termination wire sizes ranging from 14 to 18 AWG (x2). With a mechanical design life rated at a minimum o
The Allen Bradley/Rockwell Automation 836 series 836-A4 pressure control device works in pneumatic and hydraulic applications. It maintains and controls pressure between 2 different values that need have been previously set.
This bimetallic overload relay features a surge withstand rating of 6 kilovolts and can handle a rated frequency of 50 to 60 hertz. It includes solid screw connections using M4 screw sizes and is rated for safe isolation up to 440 volts between contacts. The relay conforms to Class 10 trip specifica
This fusible switch is rated for a maximum voltage of 600 Volts AC and 250 Volts DC, with the ability to interrupt up to 200 kiloamperes at 600 Volts AC. It accommodates up to 8 auxiliary circuits and demonstrates mechanical endurance for as many as 10,000 operations.
This contactor operates between 50 Hz and 60 Hz and is built with three poles to manage significant electrical loads. Designed for non-reversing applications, it has a minimum coil voltage of 110 VAC and a maximum coil voltage of 120 VAC, with a horsepower rating of 75 Hp.