Search Results

VPL-B1003F-PJ14AA

Allen Bradley / Motors / VPL Servo Motors

The VPL-B1003F-PJ14AA Low-inertia Servo Motor has 3 Magnet Stacks, a Shaft Key Shaft , and a 18-bit absolute multi-turn digital encoder (Hiperface DSL protocol) Feedback.

1494F-D100

Allen Bradley / Motors / 1494 Disconnect Switches

This disconnect switch is classified as size 100 and supports a flushing operation frequency of up to 6 Hz. It can maintain operation at altitudes of 2000 meters. The maximum relative humidity rating is 90% at 20 °C and 50% at 40 °C. Typical operations can reach a mechanical life of 20,000 cycles, w

592-EEGD

Allen Bradley / Motors / 592 Overload Relays

This overload relay is direct mounted to a NEMA Contactor Size 3. With a maximum fault current of 100 kA and short circuit voltage capacity of 600 Volts, it provides effective protection against overload and phase loss. The device features auxiliary contacts configured as one normally open (N.O.) an

140MG-J8P-D15

Allen Bradley / Motors / 140M Circuit Breakers

The Allen-Bradley 140MG-J8P-D15 Circuit Breaker is a Motor Protector Circuit Breaker with only an adjustable magnetic trip unit. It has a 100 kilo-Amps (KA) interrupting rating at 415 Volts AC and a continuous current rating of 150 Amps.

842E-MIP2BA

Allen Bradley / Motors / 842 Encoders

This encoder supports a supply voltage range of 10 to 30 V DC and consumes 3.0 W of power. It features an 18-bit single-turn resolution of 262,144 positions and, for multi-turn applications, provides a 12-bit resolution of 4,096 revolutions. With an accuracy limit of ±0.03 degrees, it ensures precis

140M-D8E-C16

Allen Bradley / Motors / 140M Circuit Breakers

The Allen-Bradley 140M-D8E-C16 circuit breaker is a 140M circuit breaker. It is designed for the protection of motors. The 140M-D8E-C16 circuit breaker is a D-frame breaker.

1489-M1C200

Allen Bradley / Motors / Bulletin 1489

With a single-pole configuration, this breaker operates efficiently at a continuous current of 20A. It manages maximum voltages of 277V AC under UL/CSA and 230V AC per IEC/EN standards. The breaker uses a C trip curve and is suitable for DIN rail mounting, providing a versatile solution for various

842E-CM-SIP4BA

Allen Bradley / Motors / 842 Encoders

The Allen-Bradley 842E-CM-SIP4BA Ethernet IP Encoder is the part number for an Ethernet-enabled single-turn encoder interface from the Bulletin 842E-CM encoder family in the 842 Encoders series. This device has a single-turn encoder and it supports CIP Sync and CIP motion technology. Its power consu

MPL-B540K-MJ24AA

Allen Bradley / Motors / MPL Servo Motors

592-EC2CC

Allen Bradley / Motors / 592 Overload Relays

The Allen-Bradley 592-EC2CC E3 Plus Overload Relay is a solid-state overload relay device. It is designed to protect single-phase or 3-phase squirrel cage induction motors. This device has a rated current range of 5 to 25 Amps and a nominal operating voltage rating of 690 Volts AC.