Search Results
3153 results
91-00992-05
Eaton Cutler-Hammer / Panelmates / Panelmate 92**
This operator terminal employs a dot pitch of 0.28 mm, contributing to detailed image quality. It supports baud rates from 110 to 38400, facilitating flexible communication. The presence of a CRT terminal enhances the visual interface, while the inclusion of a keypad, microprocessor, and flash memor
CN15NN3A
Eaton Cutler-Hammer / Drives / Freedom Series
Operating at full load currents of 120 V at 60 Hz and 110 V at 50 Hz, this unit has a NEMA Size 4 frame. It supports a horsepower capacity of 40 hp at 208 V, 50 hp at 240 V, and up to 100 hp at 480/600 V. The CN15NN3A is configured as a non-reversing device with three poles and features screw-type t
S801V65N3S
Eaton Cutler-Hammer / Drives / S801 Soft Starters
The S801V65N3S Open Soft Starter has a 240 max. Voltage AC and a 120 max. Voltage DC.
DG1-32031FB-C21C
Eaton Cutler-Hammer / Drives / PowerXL DG1
The Eaton DG1-32031FB-C21C Variable Frequency Drive is a general-purpose AC drive with 200 Volts AC operating voltage, 31 Amps operating current, and 10 Horsepower output power. It comes with a factory-installed EMC line filter, and it has an IP 21 enclosure protection rating.
S811R13N3S
Eaton Cutler-Hammer / Drives / S811 Soft Starters
The Eaton S811R13N3S Open Soft Starter has a 135 Max. Current Capacity and a 50 230V Hp Rating.
W201K2CN
Eaton Cutler-Hammer / Drives / W201 Contactors
This contactor features three poles and is classified under NEMA Size 2. The coil voltage is rated at 110 volts with a frequency of 50 Hz. The physical dimensions are 2.5 inches in width, 6.5 inches in height, and 4.84 inches in depth. With a weight of 2 pounds, it offers efficient performance and r
D100CA20
Eaton Cutler-Hammer / PLCs / D100 Micro Programmable Logic Controllers
This programmable controller includes 12 inputs and 8 outputs, capable of expanding to 24 inputs and 16 outputs overall. It operates on a supply voltage of 115 volts AC and provides a communication interface via an RS232 port. The unit supports 24 volts DC input and features Triac outputs. The devic
MOPEG48D
Eaton Cutler-Hammer / Drives / Eaton Motor Operators
Designed for high efficiency, the MOPEG48D motor operator operates within a voltage range of 24 to 48 volts DC. It has a frame classification of Series G E and a maximum inrush current rating of 3 A. Also, this device features manual control capabilities, a direct mount structure, and is suitable fo
MOPFD240C
Eaton Cutler-Hammer / Drives / Eaton Motor Operators
This motor operator features inrush current rated at 1.0 A and uses 18-inch pigtail leads for electrical connections. It has functionalities for ON, OFF, and Reset operations and is compatible with Frame size J and K. Suitable for operating conditions, it can handle humidity levels of up to 80% (non
91-01538-04
Eaton Cutler-Hammer / Panelmates / Panelmate 92**
The Eaton Corporation 91-01538-04 CRT monitor operates with a voltage of 120 to 230 Volts AC and a current rating of 0.7 Amps. It has a power conssumption rating of 50 Watts.