1606-XL480E-3W
Engineered for 3-phase systems, this power supply operates efficiently at an input frequency range of 47 to 63 Hz. It delivers a current of 20 A with a ripple and noise rating of less than 30 mVpp. Wi
In Stock Ships Today
4.8
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley 1606 Switched Mode Power Supplies
Allen Bradley's 1606 switched mode power supplies are compact power supplies that are easy to mount on DIN Rails. Some 1606 power supplies support both AC and DC input voltage, and some support multiple AC input voltage ratings. Additionally, the 1606 switched mode power supplies can operate with typical efficiency ratings between 90 and 95%. These power supplies are designed to operate with low levels of electromagnetic emissions and to be immune to a variety of electrical disturbances.
Learn more
Browse 1606 Switched Mode Power Supplies
Browse available units in our catalog of 1606 Switched Mode Power Supplies.
1606-XLS960EE
The 1606-XLS960EE Switched Mode Power Supply has an Adjustable Output Voltage and Minimal Heat Generation.
Available
4.7
1606-XL720E-3
This module operates effectively within an input frequency range of 47 to 63 Hertz and has a continuous voltage tolerance from 340 to 576 volts AC. It has a 2 Amp input current rating and supports a s
In Stock Ships Today
4.6
1606-XLSBUFFER24
The 1606-XLSBUFFER24 Switched Mode Power Supply has an Adjustable Output Voltage and Minimal Heat Generation.
Available
4.6
1606-XLERED
The 1606-XLERED Switched Mode Power Supply has an Adjustable Output Voltage and Minimal Heat Generation.
In Stock Ships Today
4.9
1606-XL240DR
The 1606-XL240DR Switched Mode Power Supply has an Adjustable Output Voltage and Minimal Heat Generation.
In Stock Ships Today
5.0
1606-XLSRED40
Operating within a 12 to 28-volt DC voltage range, the 1606-XLSRED40 redundancy module can continuously handle input currents of up to 20 amps. For five seconds, the input current can peak at 32.5 amp
In Stock Ships Today
5.0
1606-XLS480F-3
The 1606-XLS480F-3 Switched Mode Power Supply has an Adjustable Output Voltage and Minimal Heat Generation.
In Stock Ships Today
4.8
1606-XL120DR
The 1606-XL120DR Switched Mode Power Supply has an Adjustable Output Voltage and Minimal Heat Generation.
In Stock Ships Today
4.9
1606-XLS480G
The 1606-XLS480G Switched Mode Power Supply has an Adjustable Output Voltage and Minimal Heat Generation.
In Stock Ships Today
4.8
Showing 31-40 of
96
results
About 1606 Switched Mode Power Supplies
The 1606 Switched Mode Power Supplies are manufactured by Allen-Bradley. This range of power supplies are cost-optimized without sacrificing their performance, quality, and reliability. The 1606 Switched Mode Power Supplies support both AC and DC input voltages. For AC voltage, this series of power supplies can meet single and 3-phase application requirements. This wide operating voltage range helps in accommodating a wide range of applications on the industrial floor. Power supplies in the 1606 series are available in different sizes. Additionally, the 1606 Switched Mode Power Supplies have a maximum efficiency rating of 94%, and they have exceptional partial load efficiency. Also, the power supplies in this series have an active power factor correction, a very low inrush current surge, and they can operate at full power at an ambient temperature between a minimum of -25 degrees Celsius and a maximum of 60 degrees Celsius. It is recommended to avoid environments with corrosive atmospheres when installing and mounting these units to prolong their life.
For parallel use, the 1606 Switched Mode Power Supplies all have a current sharing feature. Note that the output power for the 1606 Switched Mode Power Supplies is affected by the surrounding temperature. For example, at 45 degrees Celsius, the 1606 power supplies have an output of 576 Watts, while at 60 degrees Celsius, they have an output power of 480 Watts. The Allen-Bradley 1606 Switched Mode Power Supplies have power losses of 37.8 Watts and 30.6 Watts at 120 Volts AC and 230 Volts AC, respectively. The rated operating temperature for 1606 power supplies ranges from -25 degrees Celsius and 70 degrees Celsius. These power supplies have a weight of 1000 grams. For certifications, the 1606 Switched Mode Power Supplies are listed by the Underwriters Laboratories. For the proper installation of the Allen-Bradley 1606 switched-mode power supplies, the cables need to be made out of copper and they must be rated for operations between 70 and 90 degrees Celsius, and the cable length must be calculated properly too.