The industrial modules that are found in the GE Fanuc Genius I-O series are designed to work with IBM PCs. These modules are known as IBM PC interface modules or PCIMs for short. The Genius I-O modules can be controlled by the IBM PCs or by PLCs or programmable logic controllers. The modules in this series come with the basic PCIM motherboard and daughterboard, a serial bus, I/O blocks, and a handheld monitor. The I/O blocks in the Genius I-O modules are used for diagnostics and troubleshooting. They can detect errors and problems that ordinary PLCs cannot such as short circuits, open circuits, and overloads.
The daughterboard in the GE Fanuc Genius I-O modules is similar to a Series Six PLC Bus controller, and it usually handles general-purpose I/O control applications and controls all the devices on the Genius Serial Bus. This daughterboard can communicate with the other devices on the Genius Serial Bus through background messaging and it can perform initialization and fault management tasks for up to 30 of these devices at a time. The motherboard in the GE Fanuc Genius I-O modules acts as an interface between a host system that is IBM-compatible and a daughterboard with Open Architecture. The PCIM motherboard is a 2-layer board while the PCIM daughterboard is a 4-layer board. All of the data that is shared between the Genius I-O PCIM and the host system passes through the host-shared RAM which is known as the SRI or the shared RAM interface.
Browse available units in our catalog of Genius I-O.
The IC660EBD101 electronics assembly block is manufactured by GE Intelligent Platforms/GE Fanuc as a member of the Genius I/O series. This electronics assembly block comes with 8 circuits that can be
The GE Fanuc IC660EBS102 electronics assembly is manufactured by GE Fanuc Automation. It is part of the Genius I/O block product line and it has 4 separate I/O groups with 2 groups I/O circuits each.
The IC660BBA023 Thermocouple Block is an input block made by GE Fanuc. It has 6 input circuits, 24 to 48 Volts DC of block power, -25 mV to 150 mV of voltage measurements, and 9 Watts of heat dissipat
This I/O block enables operation with AC voltages from 93 to 132 VAC and DC voltages from 105 to 132 VDC. It supports a steady state output current of 2.0 A per circuit. The block boasts a robust isol
The GE Fanuc IC660EBS103 PCI interface card for the Genius LAN interface is manufactured by GE Intelligent Platforms/Fanuc Automation. This block is part of the Genius I/O block series and has 4 power
The GE Fanuc Automation IC660EBA103 electronics assembly is compatible with different devices and different software. It can operate at a temperautre range of 0 to 60 degrees Celsius.
The GE Fanuc IC660EBD120 electronics assembly is manufactured by GE Fanuc. It belongs to the Genius I/O block product line and operates on 115 Volts AC or 10 to 30 Volts DC.
The GE Fanuc IC660CBB902 Series 6 PLC Bus Controller is for the Series 6 PLC System. This module can be installed in any CPU slots, in regular/high-capacity I/O racks, or in a remote I/O rack, and it
The GE Fanuc Automation IC660EBD020 electronics assembly has configurable features and 16 discrete inputs and outputs. These I/O can be configured to be inputs, outputs, or tristate inputs.
The GE Fanuc IC660EBD110 electronics assembly has 16 inputs. It is manufactured by GE Fanuc Automation as a member of the Genius I/O block series. The electronics assembly operates at a voltage of 93