Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley Kinetix 6000 Repair

Allen Bradley Kinetix 6000 Repair

We offer extensive repairs for your Kinetix 6000. We keep many spare parts in stock so that we can repair your Kinetix 6000 as efficiently and effectively as possible. Our standard repair lead time is 2-4 weeks. However, we can often repair your unit much faster if necessary. We can repair most issues with your Kinetix 6000 and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!

  • 2 Year DO Supply Warranty
  • Fast repairs at low costs
  • No surprises or up-charges for difficult repairs
  • Standard lead time of 2-4 weeks
  • Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more

Hardware issues & error codes we repair

We repair all of the following hardware issues and error codes with your Kinetix 6000 parts.

Browse Kinetix 6000 Repairs

Browse our catalog of repairable Kinetix 6000 parts to get a quote.

2094-BC01-MP5

The 2094-BC01-MP5 is a Kinetix 6000 Module. This module has an input voltage of 324 to 5282 Volts AC RMS. The 2094-BC01-MP5 has an input frequency of 47 to 63 Hertz. This module has a 20 millisecond l

In Stock Ships Today
Get a repair quote
Get a repair quote

2094-BC02-M02-S

This Integrated Axis Module functions within a nominal voltage range of 360 to 480 volts and can handle an input voltage range of 324 to 528 volts RMS. It operates at an input frequency between 47 and

In Stock Ships Today
Get a repair quote
Get a repair quote

2094-BC04-M03

The 2094-BC04-M03 is a Kinetix 6000 series module with an 825 Volt DC bus overvoltage. The 2094-BC04-M03 has an internal shunt resistor of 28.75 Ohms. It also has a peak power output of 55.2 kW.

In Stock Ships Tomorrow
Get a repair quote
Get a repair quote

2094-BC07-M05

The 2094-BC07-M05 Kinetix 6000 series module has a 4 kHz PWM frequency. The 2094-BC07-M05 has a bandwidth of 500 Hertz in its velocity loop, and 1300 Hertz in its current loop.

In Stock Ships Tomorrow
Get a repair quote
Get a repair quote
45678
Showing 51-60 of 92 results

Can't find the automation part you're looking for?

Our team is ready to assist you with all Allen Bradley products, repair or replacement.

About Kinetix 6000

The Kinetix 6000 series multi-axis servo drives are manufactured by Allen-Bradley and they are compatible with most motors and actuators from the same company. This family of products includes drives with integrated axis modules and plain axis modules with 2 different voltages for each module. The continuous output ratings and slot use vary according to the frame and capacity of each drive. The motor power and feedback cables need to be chosen and compared before attempting to install any of the Allen-Bradley Kinetix 6000 series multi-axis servo drives. Other accessories such as slot-filter modules and AC line filters are required to perform the installation of the drives. These can be chosen from the Allen-Bradley 2094 series. These drives are composed of both a power module and a control module.

The Allen-Bradley Kinetix 6000 series multi-axis servo drives need to be installed by qualified technicians. When mounting the drives, the enclosures or panels must be on flat, rigid, vertical surfaces and they cannot interfere with the ambient air temperature range because the drives need to be maintained in optimum conditions at all times while operating. After mounting the Allen-Bradley Kinetix 6000 series multi-axis servo drives, power rails must be applied and then the cables need to be properly connected to both the motors or actuators, the ground systems and some fuses or circuit breakers that are installed near the drive. It is also necessary to attach the drives to a ControlLogix or CompactLogix EtherNet/IP module so they can send and receive proper signals. The drives also come with status indicators that show errors that occur during the process.