- Bad communication ports
- Broken selector/key switches
- Dead batteries/Bad Battery connections
- Solid or Blinking RED OK Status Light
- Solid or Blinking RED RUN Status Light
- Solid or Blinking RED Fault Status Light
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors Repair
We offer extensive repairs for your IEC 100 Contactors. We keep many spare parts in stock so that we can repair your IEC 100 Contactors as efficiently and effectively as possible. Our standard repair lead time is 3-5 days. However, we can often repair your unit much faster if necessary. We can repair most issues and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your IEC 100 Contactors parts.
- Bad analog inputs or ouptus
- Bad digital input or outputs
- Bad relays (stuck on/off)
- Incorrect voltages on inputs or outputs
- Incorrect current on inputs or outputs
- DF1, DH-485, DH+, Profibus, Remote I/ (RIO) failures and more!
- Intermittent communication
- Solid RED/Blinkging RED communication lights
- Devicenet, Ethernet, ControlNet, RS232 ports.
- Missing CJC Jumpers
- Incorrect readings
- Failed inputs
- Dead power supplies
- Incorrect voltage
- Broken Plastic
- Poor Connections
- Bad Slots
Browse IEC 100 Contactors Repairs
Browse our catalog of repairable IEC 100 Contactors parts to get a quote.
100-E09KN400
The 100-E09KN400 contactor is an Allen-Bradley MCS-E Contactor manufactured in accordance with the IEC standards. It is a standard contactor with 4 normally open main contacts. It has a rated current
Call
100-E09KY01
This contactor comprises three poles and utilizes an electronic coil for operation. It can accommodate control voltages ranging from 48 to 130 Volts AC or DC. The contactor supports a maximum installa
Call
100-E09KY10
The 100-E09KY10 contactor is an IEC 100 series contactor. Its current rating is 9 Amps. The coil control voltage rating is 48 to 130 Volts AC/DC.
Call
100-E09KY200
The Allen-Bradley 100-E09KY200 contactor is an IEC 100 series contactor. It is also a 4-pole contactor. Auxiliary contacts are not available on the 100-E09KY200 contactor.
Call
100-E09KY400
The Allen-Bradley 100-E09KY400 contactor is a large contactor. It is a 4-pole contactor. The 100-E09KY400 has 4 normally-open contacts.
Call
100-E09QJ01
The Allen-Bradley 100-E09QJ01 contactor is an IEC 100 3-pole contactor. It has a current rating of 9 Amps. The 100-E09QJ01 contactor has one normally-closed auxiliary contact.
Call
100-E09QJ10
The Allen-Bradley 100-E09QJ10 contactor is an IEC 100 series contactor with a 9 Amps current rating. It is a 3-pole contactor. The electronic coil on the 100-E09QJ10 contactor is rated for 24 Volts DC
Call
100-E09QJ200
The Allen-Bradley/Rockwell Automation 100-E09QJ200 contactor operates with 4 poles that include 2 N.O. and 2 N.C. poles. This contactor does not include any auxiliary contacts, although these can be s
In Stock Ships Today
100-E09QJ400
The Allen-Bradley/Rockwell Automation 100-E09QJ400 IEC Contactor provides 4 normally open contact poles and it operates with a voltage rating of 24V DC. This IEC 100 contactor can be mounted on a pane
Call
100-E1060ED11
The product code 100-E1060ED11 is the product code for an industrial contactor unit manufactured by Allen-Bradley/Rockwell Automation. This IEC-certified contactor is part of the IEC 100 and 100-E ser
Call
Showing 541-550 of
783
results