- Bad communication ports
- Broken selector/key switches
- Dead batteries/Bad Battery connections
- Solid or Blinking RED OK Status Light
- Solid or Blinking RED RUN Status Light
- Solid or Blinking RED Fault Status Light
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors Repair
We offer extensive repairs for your IEC 100 Contactors. We keep many spare parts in stock so that we can repair your IEC 100 Contactors as efficiently and effectively as possible. Our standard repair lead time is 3-5 days. However, we can often repair your unit much faster if necessary. We can repair most issues and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your IEC 100 Contactors parts.
- Bad analog inputs or ouptus
- Bad digital input or outputs
- Bad relays (stuck on/off)
- Incorrect voltages on inputs or outputs
- Incorrect current on inputs or outputs
- DF1, DH-485, DH+, Profibus, Remote I/ (RIO) failures and more!
- Intermittent communication
- Solid RED/Blinkging RED communication lights
- Devicenet, Ethernet, ControlNet, RS232 ports.
- Missing CJC Jumpers
- Incorrect readings
- Failed inputs
- Dead power supplies
- Incorrect voltage
- Broken Plastic
- Poor Connections
- Bad Slots
Browse IEC 100 Contactors Repairs
Browse our catalog of repairable IEC 100 Contactors parts to get a quote.
100-E09KD10
The 100-E09KD10 contactor is an industrial contactor manufactured by Allen-Bradley/Rockwell Automation. This 3-pole contactor variant is part of the IEC 100-E/104-E series and it features direct-on-li
Call
100-E09KD200
This model supports two normally open contacts and two normally closed contacts. The device has an insulation voltage rating of 690 VAC and an operational voltage of the same level. With a rated impul
Call
100-E09KD400
This power contactor operates with a conventional thermal current of 25 A and features a main contact setup of four normally open (N.O.) contacts. It has screw terminals for secure connections and sup
Call
100-E09KJ01
This contactor is rated for an isolation voltage of 690 V according to IEC standards. The device features a closing delay of 40 ms and offers screw connections for the main circuit. It includes an opt
Call
100-E09KJ10
This non-reversing contactor features a screw terminal type electrical connection and includes one normally-open auxiliary contact. The device can handle an operating frequency between 50 and 60 Hertz
Call
100-E09KJ200
The 100-E09KJ200 contactor is a large frame IEC 100 series contractor from Allen-Bradley. It has an operating current rating of 9 Amps. It has a control voltage range of 24 to 60 Volts AC/20 to 60 DC
Call
100-E09KJ400
This contactor features four normally open (N.O.) contacts, accommodating multiple motor control needs while having no normally closed (N.C.) contacts. It boasts a rated operational voltage and insula
Call
100-E09KN01
This contactor features one normally closed auxiliary contact and can operate effectively at an installation altitude of up to 3000 m. It is rated for a maximum switching frequency of 600 operations p
Call
100-E09KN10
The 100-E09KN10 contactor is an IEC 100 series standard MCS-E contactor. It is one of the Bulletin 100-E power contactors from Allen-Bradley. This model is available with an A3 duty rating and it come
Available
100-E09KN200
The 100-E09KN200 contactor is an IEC 100 contactor from the Allen-Bradley Bulletin 100-E line of products. It is AC3 rated and has a current rating of 9 Amps. It comes with 4 poles that include 2 N.O.
Call
Showing 531-540 of
783
results