- Bad communication ports
- Broken selector/key switches
- Dead batteries/Bad Battery connections
- Solid or Blinking RED OK Status Light
- Solid or Blinking RED RUN Status Light
- Solid or Blinking RED Fault Status Light
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors Repair
We offer extensive repairs for your IEC 100 Contactors. We keep many spare parts in stock so that we can repair your IEC 100 Contactors as efficiently and effectively as possible. Our standard repair lead time is 3-5 days. However, we can often repair your unit much faster if necessary. We can repair most issues and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your IEC 100 Contactors parts.
- Bad analog inputs or ouptus
- Bad digital input or outputs
- Bad relays (stuck on/off)
- Incorrect voltages on inputs or outputs
- Incorrect current on inputs or outputs
- DF1, DH-485, DH+, Profibus, Remote I/ (RIO) failures and more!
- Intermittent communication
- Solid RED/Blinkging RED communication lights
- Devicenet, Ethernet, ControlNet, RS232 ports.
- Missing CJC Jumpers
- Incorrect readings
- Failed inputs
- Dead power supplies
- Incorrect voltage
- Broken Plastic
- Poor Connections
- Bad Slots
Browse IEC 100 Contactors Repairs
Browse our catalog of repairable IEC 100 Contactors parts to get a quote.
100-E146KY11L
This contactor operates efficiently with a rated insulation voltage of 1000V. It includes a variety of connection options such as built-in lugs and cable clamp connections for secure wiring setups. De
Call
100-E16EJ01
The 100-E16EJ01 contactor is a direct-on-line IEC contactor manufactured by Allen-Bradley/Rockwell Automation. It comes with 3 main contacts and 1 N.C. auxiliary contact composition. The coil voltages
Call
100-E16EJ10
The Allen-Bradley 100-E16EJ10 contractor is an 18 Amps rated IEC 100 contractor. It is a 3-pole contactor. The control voltage for the contactor coil is 24 to 60 Volts AC/DC.
Call
100-E16EJ200
The 100-E16EJ200 contactor is an 18 Amps rated contactor. It is part of the IEC 100 and 100-E series from Allen-Bradley. The 100-E16EJ200 contactor is a 4-pole contactor.
Call
100-E16EJ400
The Allen-Bradley 100-E16EJ400 contactor is an IEC 100 Contactors series 4-pole contactor. It has an operational current rating of 18 Amps. The 100-E16EJ400 contactor has 4 normally-open auxiliary con
Call
100-E16EQ01
The Allen-Bradley 100-E16EQ01 contactor is a 3-pole contactor. Its current rating is 18 Amps. The control voltage rating for the contactor is 12 to 20 Volts DC.
Call
100-E16EQ10
The Allen-Bradley 100-E16EQ10 contactor is an IEC 100 and 100-E series large contactor. It is a 3-pole contactor. The current rating for the 100-E16EQ10 contactor is 18 Amps.
Call
100-E16EQ200
The Allen-Bradley/Rockwell Automation 100-E16EQ200 motor contactor includes screw terminals and thru-hole terminals that operate with 9 to 96 Amps and 116 to 2650 Amps, respectively. This IEC 100 cont
Call
100-E16EQ400
The Allen-Bradley/Rockwell Automation 100-E16EQ400 IEC 100 series contactor includes electronically controlled coils that help reduce pick-up currents. The contactor comes with a compact design and it
Call
100-E16KD01
This contactor supports a rated insulation voltage of 690 VAC and operates efficiently at a rated operational voltage of 690 VAC. It features no normally open contacts, with one normally closed contac
Call
Showing 591-600 of
783
results