- Bad communication ports
- Broken selector/key switches
- Dead batteries/Bad Battery connections
- Solid or Blinking RED OK Status Light
- Solid or Blinking RED RUN Status Light
- Solid or Blinking RED Fault Status Light
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley PLC 5 Repair
We offer extensive repairs for your PLC 5. We keep many spare parts in stock so that we can repair your PLC 5 as efficiently and effectively as possible. Our standard repair lead time is 2-4 weeks. However, we can often repair your unit much faster if necessary. We can repair most issues with your PLC 5 and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your PLC 5 parts.
- Bad analog inputs or ouptus
- Bad digital input or outputs
- Bad relays (stuck on/off)
- Incorrect voltages on inputs or outputs
- Incorrect current on inputs or outputs
- DF1, DH-485, DH+, Profibus, Remote I/ (RIO) failures and more!
- Intermittent communication
- Solid RED/Blinkging RED communication lights
- Devicenet, Ethernet, ControlNet, RS232 ports.
- Missing CJC Jumpers
- Incorrect readings
- Failed inputs
- Dead power supplies
- Incorrect voltage
- Broken Plastic
- Poor Connections
- Bad Slots
Browse PLC 5 Repairs
Browse our catalog of repairable PLC 5 parts to get a quote.
1770-KF2
The Allen-Bradley 1770-KF2 module is a Data Highway or Data Highway Plus asynchronous interface module. It is a Series B communication interface. It has a power supply of 0.3 Amps at 115 to 230 Volts
In Stock Ships Today
1770-KF3
This module operates at data rates of up to 19.2 kbps for both communication ports. Supporting a maximum of 32 nodes, it enables seamless integration into various systems. The device can handle input
In Stock Ships Today
1770-KFC
Designed as a communication interface for ControlNet networks, the 1770-KFC operates across a voltage spectrum of 115 to 230 V and supports frequencies from 50 Hz to 60 Hz. It has an output power rati
Call
1770-KFC15
The Allen-Bradley 1770-KFC15 ControlNet Communication Interface Module comes with a 115 to 230 Volts AC operating voltage range and 10 Amps of branch circuit protection current rating. It has a rear R
In Stock Ships Today
1770-KFCD15
This module integrates seamlessly with the ControlNet network protocol, providing reliable communication within automated systems. Featuring a cable length of 3 meters, it is equipped with LED indicat
In Stock Ships Today
1770-KFD
The Allen-Bradley 1770-KFD DeviceNet RS-232 Interface Module runs on 9.0 Volts DC voltage and 1 Amp of current. It has an RS-232 communication port, a 9-Pin D-Shell RS-232 Connector, and a 9-Pin D-She
In Stock Ships Today
1770-KFDG
The Allen-Bradley 1770-KFDG DeviceNet RS-232 Interface Module with 9.0 Volts DC and 1.0 Amp of current rating. It has an RS-232 communication port, a 9-Pin D-Shell RS-232 Connector, and a 9-Pin D-Shel
Available
1770-P1
Power Supply, 120 or 220/240 Volts AC Nom Input Voltage, 105-225 or 205-250 Volts AC Input Voltage Range, N/A Backplane Output Current
In Stock Ships Today
1770-RG
The Allen-Bradley 1770-RG Report Generation Module comes with an intelligent printer interface port and a real-time clock. It has 2 RS-232 Serial ports, LED diagnostics and status indicators, and 1.0
Available
1770-SA
This stand-alone I/O adapter is primarily used with PLC-2/Mini systems and features a 15-pin D-Shell female connector for interconnectivity. It offers optical isolation for logic circuits from field w
Available
Showing 11-20 of
523
results
About PLC 5
The PLC 5 controllers series is a series of programmable controllers which are used at the center of a machine architecture system which brings together existing and future networks by using different types of networks, including Ethernet/IP, ControlNet, and DeviceNet networks. They offer connectivity between the SLC 500, ControlLogix, and MicroLogix controllers. These controllers can help to control the architecture and offer cost-effective connections to a wide range of devices. They feature input/output modules inside a single chassis with a power supply. The PLC 5 controllers come with onboard remote I/O scanner ports and onboard extended I/O scanner ports. These controllers are available in a wide range of input/output capacities and memory sizes. They can also be connected to a wide variety of networks for distributed processing and distributed input/output.
The PLC 5 controllers come with several programming features that help to serve different application demands. They come with ladder logic which programs a language and is representative of the relay logic. The subroutines in the controllers help to store the recurring sections of the program logic which can be accessed from multiple program files. They also feature sequential functional charts and structured texts. The PLC 5 controllers come with a maximum of 16 module I/O slots. Also, the controllers can be mounted by using a back panel or by using a rack. A wide variety of data formats are available in the PLC series. No external power is required for the controllers. The PLC 5 controllers are also available based on the number of user memory words, memory size, processor types. The PLC 5 controllers are also available with different input resolutions, input types, and output resolutions. Various operating voltages can be used to run the controllers. Multiple LED indicators are housed in the PLC 5 controllers to show different information.
Common error/issues withe PLC 5 include:
Plastics, power supply, enclosure and mounting
Mounting clips
Dismounting clips
Racking guides
Grounding clip
Dead backplane
Stripped threads
Damaged rack
no power through AUX power
Damaged power board
Power pins
Node address switches
Communications
RS-232
DH+ ports
Ethernet port
Side mounted port
No connection
Loss of communications
No communications
Faulty key switch
Lights
BATT light
Solid PROG lights
LED indicators
I/O
Discrete output replacement relay or TRIAC
Discrete input replacement
Analog out
Analog in
RTD channel repair
Fused input/output replacement