- Bad communication ports
- Broken selector/key switches
- Dead batteries/Bad Battery connections
- Solid or Blinking RED OK Status Light
- Solid or Blinking RED RUN Status Light
- Solid or Blinking RED Fault Status Light
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley Point I/O 1734 Repair
We offer extensive repairs for your Point I/O 1734. We keep many spare parts in stock so that we can repair your Point I/O 1734 as efficiently and effectively as possible. Our standard repair lead time is 2-4 weeks. However, we can often repair your unit much faster if necessary. We can repair most issues with your Point I/O 1734 and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your Point I/O 1734 parts.
- Bad analog inputs or ouptus
- Bad digital input or outputs
- Bad relays (stuck on/off)
- Incorrect voltages on inputs or outputs
- Incorrect current on inputs or outputs
- DF1, DH-485, DH+, Profibus, Remote I/ (RIO) failures and more!
- Intermittent communication
- Solid RED/Blinkging RED communication lights
- Devicenet, Ethernet, ControlNet, RS232 ports.
- Missing CJC Jumpers
- Incorrect readings
- Failed inputs
- Dead power supplies
- Incorrect voltage
- Broken Plastic
- Poor Connections
- Bad Slots
Browse Point I/O 1734 Repairs
Browse our catalog of repairable Point I/O 1734 parts to get a quote.
1734D-IB16S
This digital DC input module provides functionality for 16 channels with current sinking type inputs. It operates efficiently with an input voltage range of 10 to 28.8 VDC and can be mounted to DIN ra
Call
1734D-IB8XOB8E
The Allen-Bradley 1734D-IB8XOB8E is a POINT I/O POINTBlock DC 8 I/O Module. It has 24 Volts DC Voltage and a Power Consumption of 8.2 Watts with a Power Dissipation of 2 Watts.
Available
1734D-IB8XOB8ES
The Allen-Bradley 1734D-IB8XOB8ES is a POINT I/O POINTBlock DC 8 I/O Module. It has 24 Volts DC Voltage and a Power Consumption of 8.2 Watts with a Power Dissipation of 2 Watts.
Available
1734D-IB8XOW8
The Allen-Bradley 1734D-IB8XOW8 is a POINT I/O POINTBlock DC 8 Input/ 8 Relay Module. It has 8.2 Watts Power Consumption and a Power Dissipation of 2 Watts with a Supply Voltage of 24 Volts DC. This P
In Stock Ships Tomorrow
1734D-IB8XOW8S
This combination block features 16 points, comprising 8 sink inputs and 8 relay outputs. It operates with a 24 V DC input voltage and supports communication via DeviceNet. The output voltage ranges be
Available
1734sc-IE2CH
This module operates with a voltage range between 10 and 28.8 VDC and achieves a point bus current of 12 mA at 5.1 VDC. The unit supports total power dissipation up to 0.6 W at 28.8 VDC, and thermal d
Call
1734sc-IE4CH
The 1734sc-IE4CH Input Module is used with the Rockwell Automation Point IO series and has a 1 W min. Thermal Dissipation.
Call
1734sc-IF4U
Designed for flexibility, the 1734sc-IF4U module can accommodate input currents from 0-20 mA and 4-20 mA while maintaining a resistance range of 0 to 3000 Ohms. The device operates effectively within
Call
1734sc-OE2CIH
This output module supports a resolution of 16 bits, with an analog update time of 10 ms and HART communication updating every 6 seconds. It can handle an output load between 0 and 750 Ohms and caters
Call
ILX34-MBS232
This communications module utilizes RS-232 as its communication port type, with a maximum applicable distance of 50 feet. It operates effectively in temperatures starting from 0°C up to 55°C during st
Call
Showing 111-120 of
121
results
About Point I/O 1734
The Allen-Bradley 1734 Point I/O modules are available as digital, analog, specialty, AC/DC, RTD, Thermocouple, and point guard safety-rated input/output modules for a range of applications. Each module has 1 to 8-point channel density and they support producer/consumer technology for sharing input information and output status between multiple Logix controllers. Four of the main components of the Point I/O 1734 modules are communication interface modules, terminal base units, power distribution modules, and field interface and system-interface circuitry. The network protocols available for modules in the Point I/O 1734 product family include the EtherNet/IP, ControlNet, DeviceNet, Profibus, and other open network protocols. They allow up to 504 channels on a single network interface. The modular design and removable terminations offer the flexibility and cost-effectiveness of using only the modules that the users’ specific applications require. They also allow for the side-by-side operation of standard I/O and safe I/O in the same chassis, and they support local and remote operation.
Point I/O 1734 modules are a major component of Allen-Bradley Automation Integrated Architecture systems and they offer channel-level diagnostics for fast and seamless troubleshooting. Modules in this family are equipped with user-configurable features, including channel-level alarm announcements and channel-level short-circuit detection with electronic feedback to meet application-specific requirements. Point I/O 1734 modules have remove and insert under power (RIUP) support to allow for maintenance while the system is running and the modules and base units can be mounted horizontally or vertically without impeding performance. The full add-on profiles for programming Point I/O 1734 modules are available in the Studio 5000 and RSLogix 5000 computer software.