Panelview 1200 Repair

Allen Bradley Panelview Panelview 1200
One Year DO Supply WarrantyOne Year DO Supply Warranty 
'Fast RepairsFast repairs at low costs

We offer extensive repairs for your Panelview 1200. We keep many spare parts in stock so that we can repair your Panelview 1200 as efficiently and effectively as possible. Our standard repair lead time is 3-5 days. However, we can often repair your unit much faster if necessary. We can repair most issues with your Panelview 1200 and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!

Repair Details

We can repair hardware issues and errors codes with your Panelview 1200 such as:

  • Defective Touchscreens and Keypads
    • Stuck key/keypad (Fatal 3A or Error 31)
    • Cracked touchscreens
    • Dead Spots
    • Calibration issues
  • Displays
    • Blank Displays
    • Dead pixels
    • Burn in
    • Lines through the screen
    • Failing CRT
    • Dim/faded screens
  • Broken housing and bezel
    • Cracked Plastic
    • Broken Mounting Posts/Clips
    • Internal Broken Components
  • Error Codes
    • Self-test errors
    • Real Time Clock Errors
    • Failing Batteries
    • Communication Failures (RS-232, DH+, DH-485, Ethernet, Devicenet, ControlNet and more).
  • Dead/Dying Backlights
    • Halogen Lamps
    • Led Backlights
  • Power Supply Failures
    • Dead units
  • Mother Board Failures
    • Solid LED Status lights
    • Blinking LED Status Lights

The PanelView 1200 series is an Allen-Bradley series of interface terminals. These terminals are used in modern industrial systems. They act as a means of communication between the operators and the factory automation devices. Different kinds of status messages and information can be viewed on these interface terminals. Based on this information, various kinds of important operating decisions can be made. The PanelView 1200 terminals are available with a screen size of 10.1 inches. These terminals are available as keypad or touchscreen terminals with color or monochrome displays. The monochrome display uses a single color only for its graphics. These terminals are widely used in connection with programmable logic controllers. All the information about the terminals in this series is stored in an application file that can be accessed by using the Panel builder 32 software. Both EPROM and EEPROM are supported by this terminal.


The PanelView 1200 terminals are pre-assembled and they are shipped ready to install in a control panel. They can also be directly connected to any Allen-Bradley remote I/O link. The PanelView 1200 series terminals are manufactured with high-grade components and rugged construction to survive in harsh environmental conditions. Application files for terminals in this series can be downloaded from the development computer to the terminals by using the RS-232 connection or by using a Data Highway plus connection. The PanelView 1200 terminals are equipped with batteries for extended backup.  Advanced features in the terminals include the message and alarm handling capabilities. The PLC controllers can trigger the message setup in the terminals. These terminals can also be configured to activate a beeper each time a function button or touch cell is pressed. The PanelView 1200 terminal diagnostics options perform a number of fault detection tests while running.

Part Number Description Price Action
2711-KA1Panelview 1200 Repair Service$956cartAdd To Cart
2711-KC1Panelview 1200 Repair Service$946cartAdd To Cart
2711-TA1Panelview 1200 Repair Service$1408cartAdd To Cart
2711-TA4Panelview 1200 Repair Service$945cartAdd To Cart
2711-TC1Panelview 1200 Repair Service$1236cartAdd To Cart
2711-TC4Panelview 1200 Repair Service$237cartAdd To Cart
Part Number Description Price Action
Don't see yours? Give us a call.