7333 results
Supporting an input voltage range of 115/230 VAC, the 1365-PAN controller is rated for motors between 1/4 and 2 HP. This controller employs BASIC PROCESS CONTROL for its operation and is configured for single-phase systems, operating effectively within a humidity range of 0 to 80%.
The Allen Bradley 592-EC2CC E3 Plus Overload Relay is a solid-state overload relay device. It is designed to protect single-phase or 3-phase squirrel cage induction motors. This device has a rated current range of 5 to 25 Amps and a nominal operating voltage rating of 690 Volts AC.
With a single-pole configuration, this breaker operates efficiently at a continuous current of 20A. It manages maximum voltages of 277V AC under UL/CSA and 230V AC per IEC/EN standards. The breaker uses a C trip curve and is suitable for DIN rail mounting, providing a versatile solution for various
The VPL-B1152F-PJ12AA Low-inertia Servo Motor has 2 Magnet Stacks, a Shaft Key Shaft , and a 18-bit absolute multi-turn digital encoder (Hiperface DSL protocol) Feedback.
The 100-C72DJ10 Contactor is an AC and DC operated magnetic contactor manufactured by Allen Bradley/Rockwell Automation. It has 3 poles, a normally closed contact, and screw-type terminals. The maximum load current of the module is 72 Amps.
This disconnect switch is classified as size 100 and supports a flushing operation frequency of up to 6 Hz. It can maintain operation at altitudes of 2000 meters. The maximum relative humidity rating is 90% at 20 °C and 50% at 40 °C. Typical operations can reach a mechanical life of 20,000 cycles, w
This circuit breaker is constructed in a Frame C size and has an overload release setting of 18 Amps. It can handle a rated short-circuit breaking capacity of 15 kA at 400V AC. The device has a maximum operating power of 11 kW at 400V AC and 5.5 kW at 230V AC while featuring a magnetic release curre
The Allen Bradley 842E-CM-SIP4BA Ethernet IP Encoder is the part number for an Ethernet-enabled single-turn encoder interface from the Bulletin 842E-CM encoder family in the 842 Encoders series. This device has a single-turn encoder and it supports CIP Sync and CIP motion technology. Its power consu
This product boasts an IP66 rating and complies with various NEMA standards including Type 1, 3, 3R, 4, 4X, and 12. It accommodates vertical or horizontal mounting and operates effectively in relative humidity levels of 5% to 95%, without condensation. Designed for installation up to an altitude of