5820GWW
As part of the Pyramid Integrator series, this Ethernet gateway kit enhances Ethernet networking capabilities. It operates within a temperature range from 0 to 40 °C and can handle humidity levels of
Call
4.6
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley Pyramid Integrator
The Allen Bradley AB Pyramid Integrator PLC System Module Processor Board and PLC-5 250.
Learn more
Browse Pyramid Integrator
Browse available units in our catalog of Pyramid Integrator.
5130MRM1
This daughterboard is designed for open-type equipment and must operate within temperature limits of 0 to 40 degrees Celsius. For storage, temperatures can range from 0 to 50 degrees Celsius. The modu
Call
4.8
5140L8R2
This product facilitates the integration of 8 slots and works seamlessly with safety-rated coded non-contact switches. It operates effectively in temperature ranges from 0°C to 50°C and can be stored
Call
4.5
5110MX
This module acts as a system/interface module and is compatible with chassis models 5110-A4 and 5110-A8. It utilizes direct communication through the backplane interface, powered by a backplane voltag
Call
4.7
5120P2
This power supply module is designed to operate within a temperature range of 0 to 40 degrees Celsius and can be stored in conditions from 0 to 50 degrees Celsius. Operating humidity levels must not e
Call
4.8
96752901
This power supply unit accommodates input frequencies between 50 Hz and 60 Hz. Its operational temperature range spans from 0°C to 60°C, while it can be stored in temperatures as low as -40°C and up t
Call
4.9
5110ISET
This documentation set includes essential information for the Pyramid Integrator chassis available in both 4-slot and 8-slot configurations. It facilitates communication over Ethernet TCP/IP to the Da
Call
4.9
5250L111
This integrated system offers a memory capacity totaling 192K words and operates at an execution speed of less than 1 millisecond per K of program. The system supports multi-controller supervisory con
Call
4.6
5150RS
This I/O scanner module operates within a temperature range of 0°C to 60°C and can be stored between -40°C and 85°C. It has a shock rating of 30 G and can be installed at altitudes of up to 2000 meter
Call
4.9
5150RS2
This remote scanner module supports two channels and is designed for vertical mounting. Its maximum current draw is 1 Amp at 5 VDC and 0.02 Amps at 12 VDC. The device utilizes natural convection for c
Call
4.6
Showing 21-30 of
51
results
About Pyramid Integrator
The Pyramid Integrator series is a series of Allen-Bradley programmable logic controllers. The Pyramid Integrator series features up to 49 entries. The Allen-Bradley modular form programmable logic controllers consist of a CPU module with a separate I/O module. The Pyramid Integrator series features chassis-based units supporting up to 8 modules per chassis. The components under the Pyramid Integrator series provide the users with an added functionality on the control systems. The Allen-Bradley Pyramid Integrators are compatible with the logic processor daughterboard pyramid integrators. The Pyramid Integrators feature control functions from different sources and they support the ladder-logic programming. The units are programmed to source operational data from similar Pyramid Integrators, so long as these fall under the same chassis. For the Allen-Bradley Pyramid Integrators, a single chassis supports up to 8 modules.
When installing the Pyramid Integrators, ensure that the power is switched off, and check whether there is sufficient room for the specific module being installed. Before powering the application back up, it is important that the users verify that the module sits firmly on the backplane of the chassis. The module should then be secured in place, to ensure that there is no movement at all. When mounting an Allen-Bradley Pyramid Integrator, the users must ensure that they are using the mounting manual for that specific unit. Further, they must have the PI components, tools, and supplies that are required for installing the unit. The components should be mounted on the rack. Check to ensure that the rack or the panel-mounting procedure is followed correctly to ensure optimal performance.