- Dead displays
- Local/remote port failures
- Main control board failures
- I/O Failures
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley Servo Drive 1398 Repair
We offer extensive repairs for your Servo Drive 1398. We keep many spare parts in stock so that we can repair your Servo Drive 1398 as efficiently and effectively as possible. Our standard repair lead time is 2-4 weeks. However, we can often repair your unit much faster if necessary. We can repair most issues with your Servo Drive 1398 and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your Servo Drive 1398 parts.
- Power control board failures
- SCR/IGBT failures
- Faulty fans
- Heatsink sensor faults
- DC bus failures
- Precharge failures
- Undervoltage
- Overvoltage
- Broken Plastic Covers
- Missing Covers
- Missing Terminals
- Broken mounting attachments/corners
Browse Servo Drive 1398 Repairs
Browse our catalog of repairable Servo Drive 1398 parts to get a quote.
9101-1383-010
Measuring 3 meters in length, this black drive cable supports operation at altitudes up to 1000 meters above sea level. It is rated for a minimum operating temperature of 0 °C and a maximum of 40 °C,
In Stock Ships Today
9101-1384-050
This drive cable is constructed from polyvinyl chloride and features a black exterior. It operates efficiently within a temperature range of 0 °C to 40 °C. The cable is suitable for environments with
In Stock Ships Today
9101-1457
The 9101-1457 Allen-Bradley 1398 Servo 1398-DDM-010 is a strong drive with a 100-240 rms Volts Nominal (Single Phase) AC Input Voltage, 47-63 Hz AC Input Frequency, and 10 amps rms AC Input Current. I
Call
9101-1458
The 9101-1458 Allen-Bradley 1398 Servo 1398-DDM-020 is a strong drive with a 100-240 rms Volts Nominal (Single Phase) AC Input Voltage, 47-63 Hz AC Input Frequency, and 19 amps rms AC Input Current. I
Call
9101-1459
The 9101-1459 Allen-Bradley 1398 Servo 1398-DDM-030 is a strong drive with a 100-240 rms Volts Nominal (Single Phase) AC Input Voltage, 47-63 Hz AC Input Frequency, and 28 amps rms AC Input Current. I
Call
9101-1460
The 9101-1460 Allen-Bradley 1398 Servo 1398-DDM-075 is a strong drive with 30 amps rms AC Input Current, 141-339 Volts DC Bus Voltage, and 240 Volts rms 14 kWatts (Single Phase) Peak Power Output. It
Call
9101-1470
The Allen-Bradley 9101-1470 Servo Drive has 14.2 x 5.97 x 8.84 in (360.6 x 151.7 x 224.5 mm) Dimensions and a 16-Position Rotary DIP Address Switch.
Call
9101-1531
The 9101-1531 Allen-Bradley 1398 Servo 1398-DDM-005 is a strong drive with a 100-240 Vac rms Nominal (Single Phase) AC Input Voltage, 47-63 Hz AC Input Frequency, and 5 amps rms AC Input Current. It h
Call
9101-1532
Available
9101-1533
The 9101-1533 Allen-Bradley Positioning Drive Module 1398-PDM-100 exhibits 50 amps/Phase Continuous Output Current, G63900 Watts Continuous Shunt Power, and 10 kWatts Peak Shunt Power. Since it contro
In Stock Ships Today
Showing 51-60 of
85
results
About Servo Drive 1398
The Allen-Bradley 1398 series digital servo drives are intended to be connected to both a motor and a controller in order to perform their functions. They work in different functional modes and they can be connected to any computer with the ULTRA Master software installed on it. These drives have been designed by Allen-Bradley/Rockwell Automation. The Allen-Bradley/Rockwell Automation 1398 series of digital servo drives come with simple and compact designs that cover the electronic parts such as the power supply unit and the shunt regulator. They come with indicators and connectors on the front panel, but all the other components can be found inside the drives.
The Allen-Bradley/Rockwell Automation 1398 series digital servo drives include microcontroller technology that is in charge of performing all the calculations related to digital current, position loop, and speed control. These servo drives also include intelligent power module technology that gives the drives a high frequency and digital pulse width modulation. The digital pulse width modulation controls variables such as the current loop, overcurrent, short circuit, and overtemperature protection. The Allen-Bradley/Rockwell Automation 1398 series digital servo drives feature 5 digital I/O inputs, 2 dedicated and 2 selectable analog I/O inputs, and these require an input power range of 100 to 240 Volts AC. Some of the tools required to perform the installation of these drives are a DOS computer with a 286 microprocessor, a hard disk with 2 MB of free disk space, and a video graphics array monitor. It is also recommended to use a mouse and version 3.1 of the Microsoft Windows operating system.