- Bad communication ports
- Broken selector/key switches
- Dead batteries/Bad Battery connections
- Solid or Blinking RED OK Status Light
- Solid or Blinking RED RUN Status Light
- Solid or Blinking RED Fault Status Light
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley 2750 Intelligent Antennas Repair
We offer extensive repairs for your 2750 Intelligent Antennas. We keep many spare parts in stock so that we can repair your 2750 Intelligent Antennas as efficiently and effectively as possible. Our standard repair lead time is 3-5 days. However, we can often repair your unit much faster if necessary. We can repair most issues and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your 2750 Intelligent Antennas parts.
- Bad analog inputs or ouptus
- Bad digital input or outputs
- Bad relays (stuck on/off)
- Incorrect voltages on inputs or outputs
- Incorrect current on inputs or outputs
- DF1, DH-485, DH+, Profibus, Remote I/ (RIO) failures and more!
- Intermittent communication
- Solid RED/Blinkging RED communication lights
- Devicenet, Ethernet, ControlNet, RS232 ports.
- Missing CJC Jumpers
- Incorrect readings
- Failed inputs
- Dead power supplies
- Incorrect voltage
- Broken Plastic
- Poor Connections
- Bad Slots
Browse 2750 Intelligent Antennas Repairs
Browse our catalog of repairable 2750 Intelligent Antennas parts to get a quote.
2750-AH
The 2750-AH antenna is an Allen-Bradley 2750 series smart antenna. It can conduct transactions with read/write and programmable RFID tags. The weight of the 2750-AH antenna is 6.4 kilograms.
Call
2750-AHD
The Allen-Bradley 2750-AHD antenna is a smart RFID antenna from the Bulletin 2750 series. It is configured through a DIP switch. The input voltage to the antenna is 24 Volts DC.
Call
2750-AHP
The Allen-Bradley 2750-AHP antenna is a 2750 series smart antenna. It can be used to program programmable RFID tags. The baud rate on the antenna is set through the DIP switch.
In Stock Ships Today
2750-AHPR
The 2750-AHPR antenna is an Allen-Bradley Bulletin 2750 series smart antenna. The 2750-AHPR antenna is can be used to program programmable RFID tags. The programming range of the antenna is 5 to 9 inc
Call
2750-C1
The Allen-Bradley 2750-C1 cable is a coaxial cable from the 2750 Intelligent Antennas series. The length of the cable is 10 feet. The minimum bend radius of the 2750-C1 cable is 2 inches.
In Stock Ships Today
2750-H1
The 2750-H1 device is an Allen-Bradley 2750 series remote antenna head. It is used with a smart RFID antenna. It can be located up to 10 feet away from the smart antenna.
Call
Showing 1-6 of
6
results