- Bad communication ports
- Broken selector/key switches
- Dead batteries/Bad Battery connections
- Solid or Blinking RED OK Status Light
- Solid or Blinking RED RUN Status Light
- Solid or Blinking RED Fault Status Light
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors Repair
We offer extensive repairs for your IEC 100 Contactors. We keep many spare parts in stock so that we can repair your IEC 100 Contactors as efficiently and effectively as possible. Our standard repair lead time is 3-5 days. However, we can often repair your unit much faster if necessary. We can repair most issues and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your IEC 100 Contactors parts.
- Bad analog inputs or ouptus
- Bad digital input or outputs
- Bad relays (stuck on/off)
- Incorrect voltages on inputs or outputs
- Incorrect current on inputs or outputs
- DF1, DH-485, DH+, Profibus, Remote I/ (RIO) failures and more!
- Intermittent communication
- Solid RED/Blinkging RED communication lights
- Devicenet, Ethernet, ControlNet, RS232 ports.
- Missing CJC Jumpers
- Incorrect readings
- Failed inputs
- Dead power supplies
- Incorrect voltage
- Broken Plastic
- Poor Connections
- Bad Slots
Browse IEC 100 Contactors Repairs
Browse our catalog of repairable IEC 100 Contactors parts to get a quote.
100-D180G11
The Allen-Bradley 100-D180G11 Bulletin 100-D contactor is a large-frame contactor. It is rated for 180 Amps of current. The 100-D180G11 contactor has 3 main contacts and 2 auxiliary contacts.
Call
100-D180H00
This contactor belongs to the IEC 100 series and operates with a coil consumption of 8W at DC control. It has a contact configuration of 0 Normally Open (NO) and 0 Normally Closed (NC), and utilizes s
Call
100-D180H11
This contactor is rated at 180 Amps and uses a coil voltage of 208 Volts. Its setup includes 1 normally open and 1 normally closed auxiliary contact. The device supports electronic overload relays and
Call
100-D180J00
The 100-D180J00 contactor is an Allen-Bradley non-reversing contactor with a maximum operating current rating of 180 Amps. It comes with a conventional AC coil with a 24 Volts AC control voltage ratin
In Stock Ships Today
100-D180J11
The 100-D180J11 contactor is a non-reversing IEC-certified contactor from Allen-Bradley. It comes with 180 Amps of rated operational current at 400 Volts (AC-3). It includes a conventional type coil w
In Stock Ships Today
100-D180K00
This contactor can operate within a temperature range from -25°C to 60°C. It supports relative humidity levels from 5% to 95% non-condensing. This model can be safely stored in conditions between -40°
Call
100-D180K11
This contactor features a coil voltage rating of 24V AC and operates with rated voltages of up to 690 VAC. It includes both 1 normally open (N.O.) and 1 normally closed (N.C.) contact on its main circ
Call
100-D180M00
The 100-D180M00 contactor is an Allen-Bradley 3-pole Bulletin 100-D contactor designed for high current applications. The 100-D180M00 contactor has a conventional AC-operated coil (without a PLC inter
Call
100-D180M11
This contactor operates at a frequency of 50 Hz and is specifically rated for voltages up to 690 V AC. The electrical connections utilize screws for secure attachments, and it is suitable for installa
Call
100-D180N00
The 100-D180N00 contactor is a Bulletin 100-D CE marked contactor designed and manufactured by Allen-Bradley/Rockwell Automation. This IEC contactor has 3 poles and it is built for AC applications. Th
In Stock Ships Today
Showing 351-360 of
783
results