- Dead displays
- Local/remote port failures
- Main control board failures
- I/O Failures
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley Kinetix 350 Repair
We offer extensive repairs for your Kinetix 350. We keep many spare parts in stock so that we can repair your Kinetix 350 as efficiently and effectively as possible. Our standard repair lead time is 2-4 weeks. However, we can often repair your unit much faster if necessary. We can repair most issues with your Kinetix 350 and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your Kinetix 350 parts.
- Power control board failures
- SCR/IGBT failures
- Faulty fans
- Heatsink sensor faults
- DC bus failures
- Precharge failures
- Undervoltage
- Overvoltage
- Broken Plastic Covers
- Missing Covers
- Missing Terminals
- Broken mounting attachments/corners
Browse Kinetix 350 Repairs
Browse our catalog of repairable Kinetix 350 parts to get a quote.
2097-V31PR0-LM
This servo drive supports a continuous output current of 2.8 A, with a peak output current reaching up to 7.8 A. It is compatible with ControlLogix controllers and comes equipped with a 50-pin termina
In Stock Ships Today
2097-V31PR2-LM
Designed for three-phase operation, this servo drive operates using an input supply of 120 or 240 volts AC. It also features voltage doubling from a 120V input to provide a 240V DC bus. There is a con
Available
2097-V32PR0-LM
This servo drive is equipped with an integrated EMC input filter and features Safe Torque-Off (STO) functionality for enhanced safety. It interfaces with EtherNet/IP networks and has branch circuit pr
In Stock Ships Today
2097-V32PR2-LM
The Allen-Bradley 2097-V32PR2-LM is a single-axis servo drive with EtherNet/IP, Safe Torque-Off, a 800 W Power Rating, 5.7 Amperes Continuous Output Current (0-peak), and 240 Volts (AC), 1 Phase, Inpu
In Stock Ships Today
2097-V32PR4-LM
The Allen-Bradley 2097-V32PR4-LM is a single-axis servo drive with EtherNet/IP, Safe Torque-Off, a 1.7 kWatts Power Rating, 11.3 Amperes Continuous Output Current (0-peak), and 240 Volts (AC), 1 Phase
In Stock Ships Today
2097-V33PR1-LM
This specific servo drive model has a continuous output current of 2.8 A and a peak output current of 3 A for up to 3 seconds. The input voltage ranges from 80 to 132V RMS for 120V power and 80 to 264
In Stock Ships Today
2097-V33PR3-LM
The Allen-Bradley 2097-V33PR3-LM is a single-axis servo drive with EtherNet/IP, Safe Torque-Off, a 1.0 kWatts Power Rating, 5.7 Amperes Continuous Output Current (0-peak), and 120/240 Volts (AC), 1 or
In Stock Ships Today
2097-V33PR5-LM
The Allen-Bradley 2097-V33PR5-LM is a single-axis servo drive with EtherNet/IP, Safe Torque-Off, a 2.0 kWatts Power Rating, 11.3 Amperes Continuous Output Current (0-peak), and 120/240 Volts (AC), 1 o
In Stock Ships Today
2097-V33PR6-LM
The Allen-Bradley 2097-V33PR6-LM is a single-axis servo drive with EtherNet/IP, Safe Torque-Off, a 3.0 kWatts Power Rating, 17.0 Amperes Continuous Output Current (0-peak), and 120/240 Volts (AC), 1 o
In Stock Ships Today
2097-V34PR3-LM
The Allen-Bradley 2097-V34PR3-LM is a single-axis servo drive with EtherNet/IP, Safe Torque-Off, a 1.0 kWatts Power Rating, 2.8 Amperes Continuous Output Current (0-peak), and 480 Volts (AC), 3 Phase,
In Stock Ships Today
Showing 1-10 of
12
results
About Kinetix 350
The Allen-Bradley Kinetix 350 series is a series of single-axis servo drives that support Ethernet/IP communication. These servo amplifiers come in 120 to 240 Volts AC single-phase models and in 240 to 460 Volts AC 3-phase models. These are intelligent devices that are programmed to recognize the various types of servo motors that can be attached to them, as well as to successfully respond to any challenges that may arise in the dynamic operation of servo motors. The devices are designed to integrate quickly into industrial networks containing Allen-Bradley products such as MP series and TL series servo motors and CompactLogix or ControlLogix controllers. The Kinetix 350 drives can handle motors rated anywhere between 400 Watts and 3 kilowatts. To access the programming and setup of the servo drives, it is necessary to use the RSLogix 5000 programming software or Studio 5000 Logix Designer software distributed by Allen-Bradley/Rockwell Automation.
The Allen-Bradley Kinetix 350 series single-axis servo drives are most commonly used in packaging, automated assembly, material handling, food and beverage, pharmaceutical, and automated inspection applications. No matter what branch of industry they are being used in, these servo drives will provide superior precision in the positioning of tools and machine parts, leading to a reduction in the number of rejected products and to an increase in product quality. The maximum flexibility these drives have in terms of changing parameters and operating modes makes the Kinetix 350 series drives extremely attractive for OEMs that build machines that require continuous adaptation to new operating conditions with a wide range of speeds that need to be covered. All products from the series are CE, C-Tick, and cULus certified.