- Bad communication ports
- Broken selector/key switches
- Dead batteries/Bad Battery connections
- Solid or Blinking RED OK Status Light
- Solid or Blinking RED RUN Status Light
- Solid or Blinking RED Fault Status Light
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors Repair
We offer extensive repairs for your IEC 100 Contactors. We keep many spare parts in stock so that we can repair your IEC 100 Contactors as efficiently and effectively as possible. Our standard repair lead time is 3-5 days. However, we can often repair your unit much faster if necessary. We can repair most issues and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your IEC 100 Contactors parts.
- Bad analog inputs or ouptus
- Bad digital input or outputs
- Bad relays (stuck on/off)
- Incorrect voltages on inputs or outputs
- Incorrect current on inputs or outputs
- DF1, DH-485, DH+, Profibus, Remote I/ (RIO) failures and more!
- Intermittent communication
- Solid RED/Blinkging RED communication lights
- Devicenet, Ethernet, ControlNet, RS232 ports.
- Missing CJC Jumpers
- Incorrect readings
- Failed inputs
- Dead power supplies
- Incorrect voltage
- Broken Plastic
- Poor Connections
- Bad Slots
Browse IEC 100 Contactors Repairs
Browse our catalog of repairable IEC 100 Contactors parts to get a quote.
100-E09EQ01
The Allen-Bradley 100-E12EQ01 Contactor is part of the IEC 100 Contactors series. The 100-E12EQ01 Contactor has a rated switching current of 12 Amps. It comes with 3 poles and Class F insulation.
Call
100-E09EQ10
This contactor has a rated isolation voltage of 690 V and can withstand an impulse voltage of up to 6 kV. It is designed for a switching frequency of 600 operations per hour under AC-1 conditions. The
Call
100-E09EQ200
The 100-E09EQ200 direct-on-line contactor by Allen-Bradley/Rockwell Automation features 4 poles and it can operate on both AC and DC power sources. The unit has a rated isolation voltage of 600/690 Vo
Call
100-E09EQ400
The 4-pole contactor component with the product code 100-E09EQ400 is a DC and AC operated contactor for direct-on-line applications. The contactor is available through the IEC 100-E/104-E product seri
Call
100-E09KD01
The product code 100-E09KD01 represents a contactor unit introduced by Allen-Bradley/Rockwell Automation. The 100-E09KD01 contactor is part of IEC 100-E/104-E series and it comes with 1 normally close
Call
100-E09KD10
The 100-E09KD10 contactor is an industrial contactor manufactured by Allen-Bradley/Rockwell Automation. This 3-pole contactor variant is part of the IEC 100-E/104-E series and it features direct-on-li
Call
100-E09KD200
This model supports two normally open contacts and two normally closed contacts. The device has an insulation voltage rating of 690 VAC and an operational voltage of the same level. With a rated impul
Call
100-E09KD400
This power contactor operates with a conventional thermal current of 25 A and features a main contact setup of four normally open (N.O.) contacts. It has screw terminals for secure connections and sup
Call
100-E09KJ01
This contactor is rated for an isolation voltage of 690 V according to IEC standards. The device features a closing delay of 40 ms and offers screw connections for the main circuit. It includes an opt
Call
100-E09KJ10
This non-reversing contactor features a screw terminal type electrical connection and includes one normally-open auxiliary contact. The device can handle an operating frequency between 50 and 60 Hertz
Call
Showing 471-480 of
720
results