- Bad communication ports
- Broken selector/key switches
- Dead batteries/Bad Battery connections
- Solid or Blinking RED OK Status Light
- Solid or Blinking RED RUN Status Light
- Solid or Blinking RED Fault Status Light
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley MicroLogix 1000 Repair
We offer extensive repairs for your MicroLogix 1000. We keep many spare parts in stock so that we can repair your MicroLogix 1000 as efficiently and effectively as possible. Our standard repair lead time is 2-4 weeks. However, we can often repair your unit much faster if necessary. We can repair most issues with your MicroLogix 1000 and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your MicroLogix 1000 parts.
- Bad analog inputs or ouptus
- Bad digital input or outputs
- Bad relays (stuck on/off)
- Incorrect voltages on inputs or outputs
- Incorrect current on inputs or outputs
- DF1, DH-485, DH+, Profibus, Remote I/ (RIO) failures and more!
- Intermittent communication
- Solid RED/Blinkging RED communication lights
- Devicenet, Ethernet, ControlNet, RS232 ports.
- Missing CJC Jumpers
- Incorrect readings
- Failed inputs
- Dead power supplies
- Incorrect voltage
- Broken Plastic
- Poor Connections
- Bad Slots
Browse MicroLogix 1000 Repairs
Browse our catalog of repairable MicroLogix 1000 parts to get a quote.
1761-L20BWA-5A
Allen Bradley-PLC 25 I/O W/ANALOG DC POWER MICROLOGIX 1000 AB
In Stock Ships Today
1761-L20BWB-5A
Allen Bradley-PLC 25 I/O W/ANALOG MICROLOGIX 1000 AB
In Stock Ships Today
1761-L32AAA
Allen Bradley-PLC 32I/O MICROLOGIX 1000 AB
In Stock Ships Today
1761-L32AWA
Allen Bradley-PLC 32 I/O MICROLOGIC-1000 100/120VAC 50-60HZ AB
In Stock Ships Today
1761-L32AYC
This controller features a rated voltage range from 79 to 132 VAC and includes a master control relay for enhanced safety. It operates effectively across a frequency range of 50 to 60 Hz. The nominal
Call
1761-L32BBB
Allen Bradley-PLC 32 I/O DC/10 O DC/DCV MICROLOGIX 1000 AB
In Stock Ships Today
1761-L32BWA
This unit operates with a power supply voltage between 85 and 264 volts AC at a frequency of 47-63 Hz. The controller’s memory is based on EEPROM technology, holding around 1K, translating to approxim
In Stock Ships Today
1761-L32BWB
Allen Bradley-PLC MICROLOGIX 32 I/O 20 I DC/12 OR DC/2 AB
In Stock Ships Today
1761-L32BWZ
This PLC module supports both sinking and sourcing input configurations. It includes a built-in high-speed counter for precise input processing. Designed to operate within a supply voltage range of 85
Call
1761-NET-AIC
Designed for efficiency, this interface converter supports multidrop networks and interfaces with DH-485 applications. It manages a maximum of 32 nodes in a single network. The 1761-NET-AIC draws a cu
In Stock Ships Today
Showing 21-30 of
36
results
About MicroLogix 1000
The MicroLogix 1000 series is a series of programmable controllers that have been manufactured and designed by Allen-Bradley. These controllers come in 17 models and 6 different sizes to match different applications and budgets and one of their main features is the fact that these controllers can handle big-time applications even though they need only half the space that a regular controller does. The controllers in this series come with input terminals, input and status LEDs, a power supply line, and output terminals. These controllers also come with AC/DC inputs and different output options that can be relays, TRIAC, MOSTEF, and analog options. Once installed and programmed, the controllers in the Allen-Bradley MicroLogix 1000 series can be attached to different equipment. They also come with EtherNet/IP ports, isolated RS-232 communication channels, and LCD screens that help the users monitor, verify, and edit data.
The installation of the Allen-Bradley MicroLogix 1000 controllers can be easily performed without the need for complicated tools. There are specific requirements for the proper installation of the controllers such as leaving clearances on each side of them and using surge suppressors and emergency stop switches. The controllers might need to be grounded to avoid electrical noise. These controllers can be applied by using RSLogix programming packages, operator interfaces, and other compatible accessories that are listed in the Allen-Bradley catalog. The Allen-Bradley MicroLogix 1000 controllers come with a built-in EEPROM that retains logic and data in case the controllers lose power. This means that there is no need for additional memory or a back-up battery.